Yamaha Powersport Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I bought a timberwolf the other day and the neutral light wouldn't come on to crank, after some research I found that the ground was broke to the neutral safety switch. After regrounding to a new location it cranks but won't start, I've cleaned to carb, got a new plug with good spark, gets fuel and has compression. I decided to take the lifter inspection plates off, cranked it again and they won't move. I am new to engine work and am at a stand still.
 
1 - 1 of 1 Posts
Top