Yamaha Powersport Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi, Im wondering if anyone can give a suggestion or tip dealing with this problem i am having on my 00 yz250

Im having a problem with the throttle on the bike, the throttle tube is cracked and the grips need to be replaced cause they slip. Other then that the throttle is fine in low rpms and quick twist. When i go through the gears an when i am on the throttle fully and alot the engine will get stuck at a high rev maybe end of 3rd gear. And the throttle will only be able to twist about half inch or less. I will pull in the clutch stop the engine..If i let the throttle sit for a minute or two it will be normal again, wont high rev when i start and will be able to twist fully. I'm not sure what the problem for this is, i think its more then just the throttle tube. Maybe the throttle cable. Im not sure, how would i go about checking my possibiltys ?

-Thank you
 
1 - 2 of 2 Posts
Top