Yamaha Powersport Forums banner

1 - 20 of 25 Posts

·
I Pimp the Post Whores
Joined
·
2,238 Posts
Discussion Starter · #1 ·
Ok just Got a Few pics back on the Computer so heres Whats Done so Far!

Will update later, I have to Resize a bunch of Pics!


Re-Build Parts needed.
1) Sub-Frame(OEM){Installed}
2) Right Headlight(OEM){Installed}
3) Nose fairing, Right Side: Lower and Mid. ( Only Rashed, Now New Track Plastix)
4) Front Fairing Stay(C.F.){Installed}
5) Steering Damper(OEM){Installed}
6) Rearsets (if you dont know gotta wait)

Performance and Visual Mods.
1) 2008 R1 Raven Fairing Kit.( Enroute)
2) Rizoma Rearsets (Black W/ Silv Pegs){Installed}
3) Pazzo's Shorty's (Black w/ Silv. adjuster){Installed}
4) Driven Clip-ons (Black){TBI}
5) Driven gel Grips ( Free w/ pazzo's Short time Only @ MR.Cycles.com){TBI}
6) A&R Race baffles ({TBI}...Waiting on Y-pipe & PCIII)
7) Carbon Fiber Front Fairing Stay{Installed}
8) Carbon Fiber Ram Air tubes.{Installed}
9) Carbon Fiber Gas tank Side trim panels. ( top Cover, F/R Fenders coming soon)
10) Harris Gas Tank Cap. (Returning to Buy the HAFER just for Stresco!
)

Jeeze, let me take a Breather!


11) SportBike Frame Plugs (Found on TBF. or Ebay...very clean mod imo){Installed}
12) Clear Alternatives Intergrated tail. (Smoked){TBI}...
13) Pass pegs W/ LED Blinkers.. (Powder coated Black){enroute}
14) Custom LED Dash Swap From Blue to GREEN..(My Favorite
){Installed}
15) Puig D.B. WindScreen
16) LP Carbon Fiber Frame Sliders ( LOL, think i'll try em out this time)
17) LP Flushmount Blinkers (Smoked)
18) Fender Elim Kit ( E-bay BS)
19) Carbon Fiber toe gaurd
20) Carbon Fiber F/R Brake Ressy Caps
21) GTYR R1 Carbon FIber Tank Pad
22) GYTR Carbon Fiber triple Cover ( New Triple Coming soon)
23) C&G's Mirror Block off's.

Gunna Stop for tonight, this is getting Boring, Still more to come though !





Will have More pix Soon ......

Oh Yeah, this is how i feel right now!


jnw 1 481.JPG

jnw 1 488.JPG

jnw 1 483.JPG

jnw 1 489.JPG
 

·
I Pimp the Post Whores
Joined
·
2,238 Posts
Discussion Starter · #4 ·

·
I Pimp the Post Whores
Joined
·
2,238 Posts
Discussion Starter · #6 ·
You better not be stunting this bike after all this.... :)
Probly wont even lift up the Front..(on pourpose)

This is My newly Installed, Anti-Wheelie Device...
7) Carbon Fiber Front Fairing Stay{Installed}
Dont want this Baby to Crack! :sneaky
 

·
I Pimp the Post Whores
Joined
·
2,238 Posts
Discussion Starter · #10 ·
Wasnt that Pricey anyway!
and I Know gunna have to lay off the Wheelies!

I Craddled that bish like a Baby while Installing the headlights!
It felt so Fragile, but I love it! and you can hardly See it. Its really only there for me
and for the REAL enthusiasts to point out!
 

·
I Pimp the Post Whores
Joined
·
2,238 Posts
Discussion Starter · #11 · (Edited)
Ok new Update!
got some plastics in today!

Swapped Dampers, Installed Nose , Windscreen and Blockoffs!

:guns
Damn, this 1st Pic is So Crispy & I didnt even Put the Clipons on yet!
#1.jpg

Kinda Missin the Blue there a Bit...

#2.jpg

But Im a Raven R1der Now Bish's!

#3.jpg

#4.jpg

My Boys 07 ZZr600 in the back!

TC9VK6CAJ5H751CA5VHPR6CA04Z6GICA4F3KH9CA5S4X25CANEPOPDCA20RZ4ECAILILQACALSV01VCAPJXGRKCA0B4KP3CA.jpg
 

·
Registered
Joined
·
3,003 Posts
Looking good, the beast is coming back... :cool
 

·
Registered
Joined
·
3,003 Posts
Are you serious about the :nos ? :punch :mrgreen
 

·
mod impersonator
Joined
·
3,221 Posts
sweet...i got the mps dry nitrous kit from mccoys and still have yet to hit the button...i actually have forgotten all about it:crash
 

·
I Pimp the Post Whores
Joined
·
2,238 Posts
Discussion Starter · #17 · (Edited)
Well i dont think i'll be forgetting i have it!
it will be put to good use, If i wanted a purge kit would i have to get 2 bottles?

Still waiting on Rearsets....:rolleyes

And both side panels are on B/O for a few weeks, So i'll be riding
her as naked as the Fz1, that wouldnt cause any issues would it ???
 

·
mod impersonator
Joined
·
3,221 Posts
if you want to add the purge valve you dont need an extra bottle but your gonna be suprised at how quick you can empty your tank:fact

the only issue with riding around without your fairings is that you have to tie up the turn signal wires...i used to do it all the time:fact i kinda like the way they look without fairings for some reason:duh

I modified the tail of my bike and hid the nos bottle inside the "glove compartment" so nobody can ever tell that its there...its hidden so well i forget i have it:crash oh and my GO!!!!! button is the starter switch:pimp
 

·
Registered
Joined
·
554 Posts
You'll be fine J, but like Wicked said, it'll go fast! I have mine wired into the horn button and a 2 way switch. No fairings should be fine, I'll let ya know when they come in!
 

·
I Pimp the Post Whores
Joined
·
2,238 Posts
Discussion Starter · #20 ·
Some pix From the Ride Yesturday!
Thanx again Cap For all your help!
I never took pix of the Box, i told you came in Broke...
Didnt find anything wrong except the Faring looks a little
Bent under the sticker, its nearly unoticable unless you a Freak..(like me) so I dont care and I dont expect to Send it back for another one..Im happy the Bikes Fine.
and Runs great!

We had a Blast yesturday with a 500+ Mile Trip! :sneaky

:humpleg

DSC00244.jpg

Noticed this morning, That the Rim Looks bent in this Pic...
Im not Sure, i didnt notice it yesturday but From the pic it does!

DSC00221.jpg

DSC00227.jpg

DSC00235.jpg
 
1 - 20 of 25 Posts
Top