Yamaha Powersport Forums banner
1 - 6 of 6 Posts

·
Lucky #13
Joined
·
333 Posts
Discussion Starter · #1 ·
This is credited to 12six.

This process is pretty easy. The directions came for every bike but the 06 R6. Just wanted to practice posting pictures, and to show off the product.

First remove the two bolts on the clamp.



Then remove the bolt holding the gas tank.





Next, install the postmount. I recommend using lock-tight.






Next is installing the baseplate.






Next is to mount, and align the damper on the baseplate.






Install, and tighten all bolts.





Finished product.




Dont forget to put back on the black caps.

 

·
Lucky #13
Joined
·
333 Posts
Discussion Starter · #5 ·
i didnt do the write up, im just compiling together what other members from r6f had sent to me to help them post. i spent alot of time putting it together and i think it would be a good idea to share.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top