Yamaha Powersport Forums banner

1 - 1 of 1 Posts

·
STRAIGHT ROADS SUCK
Joined
·
2,704 Posts
Discussion Starter · #1 · (Edited)
If you have questions or information that you feel would be helpful regarding 06-07 R6’s mechanical/tech info, then post it up.


Thank you,


General Torque Specs: (06-07) R6
Front Axle: (66 FT LBS)
Front Axle Pinch Bolts: (15 FT LBS)
Front Brake Caliper Bolts: (25 FT LBS)
Steering stem nut: [top triple tree] - (85 FT LBS)
Rear Axle Nut: (80 FT LBS)
Front sprocket nut: (61 FT LBS)
Rear Sprocket Nuts: (50 FT LBS) [Service manual calls for 72 FT LBS but this is incorrect.]
Engine mounting bolt: [front left & right side] - (32 FT LBS) [This is normally where your Frame Sliders mount.]
Engine Mounting Nut: [rear upper side] - (49 FT LBS)
Engine Mounting Nut: [rear lower side] - (49 FT LBS)
Front Brake Disc Bolt: (13 FT LBS)
Rear Brake Disc Bolt: (22 FT LBS)
Rear Brake Caliper Bolt: [rear] - (16 FT LBS)
Rear Brake Caliper Bolt: [front] - (19 FT LBS)
Rear Brake Bolt/Alignment pin: (12 FT LBS)



Stock Chain/Sprocket Info:
16 Front - 45 Rear – 114 Links – 525 Pitch.
Slack: (35.0 – 45.0MM) or (1.38 – 1.77”) [Measurement taken from the top edge of lower fairing]


Oil Change Info:
Recommended Oil Viscosity: 10W30 or 20W40
Oil Drain Bolt: 17mm – (31 FT LBS)
Oil Change Without Filter Replacement: (2.54 Qt’s)
Oil Change With Filter Replacement: (2.75 Qt’s)


Ride safe.
 
1 - 1 of 1 Posts
Top