Yamaha Powersport Forums banner
1 - 20 of 74 Posts

25 Posts
Discussion Starter · #1 · (Edited)
Lets see your 02-03's

I already posted. But, We need our own thread! Pictures and Mods....

Mods: Nothing major, A&R race baffle, DB windscreen, K&N Air/Oil filters, Frame sliders, Bar ends, Spools, Integrated tail light, powder coated pass pegs/ rearsets. Up next Matris steering damper, Power Comander, & SS brakelines, Gixxer mirrors w/built in turn signal, and Pazzo or Stm levers.

2 Posts
Hi guys! Ok, here goes.... when I first got her, Almost all standard and did my first cut down standard can
second cut on standard can and tail tidy
then Micron pipe and seat cowl
black lower fairings and Ohlins rear shock
and finally, as she is now with Akrapovic end can, power commander and Pazzo levers.
Just got to fit my Ohlins forks now, he he he!

Oooops,lol... as she is now etc, lol.....

207 Posts
All my pics are on my computer at home, but here are the specs.

Original owner Silver '02, 47,000 miles.

Mods: Devil carbon fiber high-rise exhaust, Sprocket Specialist sprockets front and rear (-1 +1), Afam 520 chain, OZ 5 spoke forged wheels (black) Carbon fiber magnetic tank guard. PCIII w/ custom map, yellow box (speedo calibrator) OEM solo seat, Schnitz mirror block offs, modified factory air box, K&N filter, Lockhart Phillips small handlebar mirror, Graves bar ends and sliders (no clutch slider), Arata rearsets, Graves clutch, Pazzo shorty levers (black), Scotts steering damper, AIS removed as well as the turn signals.

Life: Tragedy or Comedy
2,843 Posts
No longer have it, but here's the list of things I did to it:

2003 R1 bought new in 03/03, sold 10/07:
Graves velocity stacks
Graves Throttle slide stops
Graves Smog block-offs
Graves Ti Slip-on and exhaust bracket
BMC race filter
PC3-r with custom map
ZG Dark tint double bubble
Yamaha solo seat cowl
CRG shorty levers
Gregg's Eggs
Magic Blinker
front marker light to signal mod
Samanna Systems Integrated Taillight & bracket
Libertek flasher relay
Libertek LED license plate light
Radiator guard
Schnitz Mirror Block offs (only used on the track though)
Earache bar ends
Earache sliders (frame, clutch, stator, swingarm spools)
Earache fixed rearsets
Graves rear brake return spring
Galfer SS brake lines front and rear
Aftermarket brake pads (I think they were SBT, but don't recall)

The last set of tires I had on the bike was Michelin Pilot Roads. Not a bad tire, and almost no wear after 1500 miles.

It wasn't anything extreme, as I prefer the near stock look. Never have been into the custom paint myself.
1 - 20 of 74 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.