Yamaha Powersport Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 41 Results
  1. General Bike Discussion
    I have 1 motor x max250i 2008 as soon as I leave the country I have engine vibration. I changed the friction completely but it still happens??? help me because I do not know
  2. Mechanical / How To
    So just recently my 2007 Yamaha R6S has been acting funny, so I ignored it thinking that it was a change in weather…. and then boom, the bike started sputtering at low rpm’s and cleared up after around 3-4K rpm’s. And I thought it was possibly bad gas (I use 92 octane) which it was not since...
  3. Scooter World
    Hi I've got a yamaha vity 2011, had it at just over 65mph but has since had a new engine put in and now will only go 40mph, I know I need to change the roller weight to 8.5g but can't find what size rollers I need for the vity? Any help at all? Thank you.
  4. Yamaha-Forum Site Support Forum
    Hey guys, i have a 07 grizzly 700 with FI, just replaced solenoid and battery, when i turn the switch on the dash will backlight but no instruments will show up, it will crank and run as long as i hold the starter button, but dies as soon as i let off the starter button, Any help?
  5. General Bike Discussion
    Hi guys, I've recently been gifted this bike, but I don't know what it is. I don't know anything about bikes! All I know about it is that it runs and it has a centrifugal clutch. It was definitely made pre-1991, I've seen a video of it being ridden in 91. The parts guy at Yamaha City said some...
  6. Mechanical / How To
    Hey there everyone! I am new this this forum and new to riding scooters in general. I'm a new rider and don't really know much about The Riva, or scooters in general. I just got my M1 license a few weeks ago and this is my first Riva. I just got the scooter about a week ago and it was working...
  7. YZ-F & YZ
    BRRAAAPPP! https://www.youtube.com/watch?v=jpn_IM7A91k
  8. General Bike Discussion
    Hi my name is Brandon. I have problem with my 92 Big Bear if anyone could help me id appreciate it. First of all just a note, the battery is dead and the new one wont be charged until 2:15 EST so it cant start right now. Here is my issue: I went to push it out of my garage to get to my other...
  9. YZF-R6, R6S, 600R
    I have a 95 yzf600r and I need both fairings for it. The previous owner said it was wrecked and the "other" owner cut off the front fairing. Does anyone know where I can get the OEM Fairings??
  10. Mechanical / How To
    I have a YZF R6 (1999) that I am repairing some things on and have a spare YYF 600R (2001) parts bike. Does anyone know if the radiator from the 600R Thundercat is interchangeable with my R6? The radiators look somewhat similar but do not match up entirely. Thanks and look forward to your...
  11. Scooter World
    I paid £230 for a Yamaha jog rr water cooled from my mate and straight away ordered a cheep 70cc big bore. After it blowing up and breaking down constantly I ordered a more expensive 70cc NGF big bore for a jog and fitted it with a new 17.5m racing carb with the jet that came with it, 4.5g...
  12. Scooter World
    Hi guys, first time posting here. I just acquired my first scooter today in a horse trade. It's a 125cc. I traded a $100 welder I wasn't using to a body shop for it. I was told straight up that it wasn't running, probably missing some parts, and he didn't know what all it needed. Well I've got...
  13. Mechanical / How To
    I was actually taking it easy when the damn thing siezed up in the tranny. 2nd gear works but clutch or no clutch stalls in any other gears. Seems to be running fine. But just another issue.
  14. FZ's, FZR's, & YZF 750
    Hi guys, Tons of other parts for sale:http://www.yamaha-yzf-750-parts-for-sale.com I have a set of almost brand new original SP camshafts. They were removed after only a few hundreds of kilometers. The bearing surfaces are barely touched. $300 for the set. SOLD 6 speed gearbox $200...
  15. YZ-F & YZ
    Right now i ruined the cylinder an piston in my yz80 Need new one Has big bore 50.95 in it right now want to stay at least at 50mm Will need cylinder, an piston kit Please let me know if anyone has one for sale Have cash and can send electronically if shipping is in picture. Live in pinellas...
  16. Mechanical / How To
    -So, I got this little 2 stroke a little while ago and it was running fine until very recently. What happens is this: It will kick start and turn over just fine; shift into first-second-third-ect. fine; and ride fine- for about a mile. At this point it gets weak, and the exhaust sounds...
  17. General Bike Discussion
    OK, I am newly registered, I checked the rules and it said I could post in the General Bike thread with a what is it worth comment. If not I apologize... Here is the deal. Our neighbor's Father passed last year and her mother is not far behind. We found this bike in their garage and a...
  18. General Bike Discussion
    i just bought this bike and im having several concerns...number one is finding a replacement starter for it and just some overall info on the bike..im a mechanic but am not familiar wiith motorcycles so here i am gettn my hands dirty..please any info on this bike will be greatly appreciated such...
  19. WR-F
    Hey, does anyone here know where to buy or how to make a new license plate bracket for a 2011 WR125X ? I cant find any suitable holders for my bike. The original bracket looks awful, and i'd like to tidy it up a little bit so i am looking for something smaller than the original. Also, it needs...
1-19 of 41 Results
Top