2009 Yamaha Big Bear 250 Boggy
Hi all I'm new to the forum and am looking forward to learning as much as I can. Ok so my 09 big bear 250 2wheel drive was having a couple light backfires when I would come off really hitting the throttle. And it wouldn't idle without working the throttle. So I figured I would clean the carb. Cleaned it really well and everything looked clean. Put it all back together and it idles and starts great. But now as soon as I give it passed 1/4 throttle in any gear it bogs and almost dies and backfires threw carb. Tore down the carb again and cleaned it. Still nothin I sprayed carb cleaner around the intake boots and it didn't rev higher. Also when I put the choke on full it doesn't bog as bad but still very noticeable. Any ideas? Thanks
|All times are GMT -7. The time now is 12:57 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright © 2007-2009 Yamaha-Forum.Net | All product names, logos, and trademarks in this site are property of their respective owners.