200 rwhp yzf 750 build - Yamaha Forum : Your Yamaha Motor Products Community & Resource
FZ's, FZR's, & YZF 750 FZ-600, FZ-700, FZ-750, & YZF-750

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 22 (permalink) Old 12-06-2011, 01:05 PM Thread Starter
Member
 
Join Date: Jun 2011
Posts: 77
 
200 rwhp yzf 750 build

Hey, I just thought I'd post some pics of my build for you guys. This build is going to take a while due to money and school, but it'll be worth the wait.

This is the fzr1000 motor I am in the process of building



I found the cylinder to look like this



That will be fixed, I may have to source a new cylinder off ebay or get her resleeved.

I have some nice thunderace forged pistons dropping in there. These will compliment my head spacer I will be ordering.



I won't give away everything, but most of you can probably see where I am going with this build
Jaustin77 is offline  
Sponsored Links
Advertisement
 
post #2 of 22 (permalink) Old 12-06-2011, 02:31 PM
Member
 
Join Date: Sep 2011
Location: Northern Ireland
Posts: 35
 
UUUMMMM...
bullitt118 is offline  
post #3 of 22 (permalink) Old 12-06-2011, 02:32 PM
Member
 
Join Date: May 2009
Posts: 39
 
Yeah how do you hope to accomplish 200 whp o even hp in general out of a 1000 motor... sorry I blueprinted mine and bored it to a 1043 and it still makes 145whp..

Good luck, ill be watching..
Fazerking is offline  
 
post #4 of 22 (permalink) Old 12-06-2011, 02:44 PM
Member
 
Join Date: May 2009
Posts: 39
 
Oh shit.... didn't see the 6262 you hve right there hahahahah
Fazerking is offline  
post #5 of 22 (permalink) Old 12-15-2011, 12:45 AM Thread Starter
Member
 
Join Date: Jun 2011
Posts: 77
 
It has been a while since I updated you guys. Today was my first day of winter break from school. Thank God...

I have a 6 speed transmission in the mail, and a billet clutch basket from a yzf 750 being repaired by a friend. Today I went ahead and split the cases and did some cleaning.

Jaustin77 is offline  
post #6 of 22 (permalink) Old 12-15-2011, 01:43 AM Thread Starter
Member
 
Join Date: Jun 2011
Posts: 77
 
I got bored, and the transmission was interesting. This is what it looks like in neutral.

Jaustin77 is offline  
post #7 of 22 (permalink) Old 12-20-2011, 11:38 AM Thread Starter
Member
 
Join Date: Jun 2011
Posts: 77
 
Here is the tranny, it is a little worn. I guess I expected that since it is older than I am.

Jaustin77 is offline  
post #8 of 22 (permalink) Old 03-12-2012, 10:38 PM Thread Starter
Member
 
Join Date: Jun 2011
Posts: 77
 
I figure I'll give you guys an update. I have the cases back together finally.
I have been busy with another project... Transforming the girl from this when I bought her:





To this:




Jaustin77 is offline  
post #9 of 22 (permalink) Old 03-13-2012, 04:34 AM
Senior Member
 
Join Date: Dec 2010
Location: Bucks, England
Posts: 172
 
What seat's that you have on there? and what seat unit?
Wayno is offline  
post #10 of 22 (permalink) Old 03-13-2012, 12:17 PM Thread Starter
Member
 
Join Date: Jun 2011
Posts: 77
 
oem 2001 r1 seat, and the tail is from airtech "2YZFR15"
Jaustin77 is offline  
post #11 of 22 (permalink) Old 03-13-2012, 12:25 PM
Senior Member
 
Join Date: Dec 2011
Location: cheshunt , herts
Posts: 253
 
looks good m8
mad73 is offline  
post #12 of 22 (permalink) Old 03-13-2012, 01:38 PM Thread Starter
Member
 
Join Date: Jun 2011
Posts: 77
 
Thank you. I still have to get a koso rx-2n ordered when I get some cash, and a few small things, but the aesthetics part is pretty much finished.
Jaustin77 is offline  
post #13 of 22 (permalink) Old 04-13-2012, 07:01 PM Thread Starter
Member
 
Join Date: Jun 2011
Posts: 77
 
Koso installed. Yes the fuel gauge does work. The purple is just the lighting, it is actually white, or whatever color you please.

Jaustin77 is offline  
post #14 of 22 (permalink) Old 04-14-2012, 02:45 AM
Senior Member
 
Join Date: Dec 2011
Location: cheshunt , herts
Posts: 253
 
liking the clocks might get something like that my self or go plasma dials not sure yet,, keep up the good work
mad73 is offline  
post #15 of 22 (permalink) Old 04-15-2012, 07:31 PM
Member
 
Join Date: Aug 2011
Location: Serbia
Posts: 73
 
Very nice, i had R1 `00 fairings on mine, but this year will go for r7... And ofc koso, is that rx2? Try to find thundercat fuel tank it will fit better with the lines of r1
nano is offline  
post #16 of 22 (permalink) Old 04-16-2012, 10:15 AM Thread Starter
Member
 
Join Date: Jun 2011
Posts: 77
 
Thanks guys. I actually like the way the 750 tank looks though. Yes it's the RX-2.
I got asked how I did the fuel sending unit so I figured I'll post in here instead of having people PM me.

First I got a Honda Blackbird fuel sending unit. Then I cut a hole in the tank as shown in the pic. Then I drilled holes and used very course threaded screws. I also used Yamabond to seal the unit to the tank. There is no such thing as too much gasket maker on places you can't see lol. I had to bend the float around the fuel pump so it is in a U shape.


Last edited by Jaustin77; 04-17-2012 at 03:35 PM.
Jaustin77 is offline  
post #17 of 22 (permalink) Old 04-21-2012, 11:17 AM
Senior Member
 
Join Date: Dec 2011
Location: cheshunt , herts
Posts: 253
 
looks good m8 was gona go r6 rairing on mine and r6 seat unit but a few people sorted of moaned saying a should keep it 750 panels , but i do like to swaping things around to make some thing dif ,,, but im sticking with the 750 stuff now going race fairing as i think thew look a little dif from std fairings but u should stick with wot u got as looks really good thumbs up to u
mad73 is offline  
post #18 of 22 (permalink) Old 04-21-2012, 12:19 PM Thread Starter
Member
 
Join Date: Jun 2011
Posts: 77
 
I looked into the thundercat tank and kinda do like it, so that may be a swap in the future nano

Thanks mad, I didn't have any 750 panels to keep besides just one side, and finding the others was too difficult
Jaustin77 is offline  
post #19 of 22 (permalink) Old 04-21-2012, 01:50 PM
Senior Member
 
Join Date: Dec 2011
Location: cheshunt , herts
Posts: 253
 
i put a thundercat tank on a fzr 3he model was a picece of piss just had to grind a little of the bottom of the tank then it fitted , check out heath fzr site really easy on the fzr cant be much diff from a yzf frame , need to get to cracking on with mine but need to play with my fzr getting ready to sell as cant keep both as i have a rd350 project as well i a can afford 3 bikes wish i could as the fzr would b a track bike ,,,,,
keep the pics coming and please look for my threads as i post them
mad73 is offline  
post #20 of 22 (permalink) Old 04-21-2012, 01:57 PM
Senior Member
 
Join Date: Dec 2011
Location: cheshunt , herts
Posts: 253
 
forgot to say as for 200bhp u might need a turbo to get that power or nitros might be wrong
mad73 is offline  
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Forum : Your Yamaha Motor Products Community & Resource forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
My edwards rep build - something special OZYZF FZ's, FZR's, & YZF 750 5 08-07-2011 02:11 PM
New build for a newbie questions emag General Bike Discussion 2 02-18-2010 08:33 PM
How NOT to build a fender Eliminator KWComp The Banter Room 13 10-01-2008 03:03 PM
J$~My 07 Re-build and MOD thread.... J Dollaz General Bike Discussion 24 05-05-2008 11:18 AM
build a space shuttle tilbury007 The Banter Room 5 04-10-2008 05:46 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome