Oxygen Sensor - Yamaha Forum : Your Yamaha Motor Products Community & Resource
 
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 05-04-2008, 09:03 AM Thread Starter
 
Join Date: May 2008
Posts: 1
 
Question Oxygen Sensor

Hi All,

This is my 1st post so be gentle.

I have a very late '05 FZ1-N inm Yellow and black.

I have just purchased a Power Commader III (which should turn up next week) and want to run the stock map but with the O2 sensor removed.

Please can someone let me know how to disconnect the O2 sensor.

Thanks in advance,

Tomson
Tomson is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 05-06-2008, 08:01 PM
Legal!
 
HornetR1's Avatar
 
Join Date: Oct 2007
Location: 45.463528,-73.291833
Posts: 4,779
 
hmmm.... you should be able to get a detail online somewhere,

i dont have the Fz but if you pm R1lover he might be able to hook you up with a link to a shop manual that would deffinately tell you how! hopefully maybe somebody will chime in to help you out!

to the forum bud!



HornetR1 is offline  
post #3 of 5 (permalink) Old 05-06-2008, 08:10 PM
STRAIGHT ROADS SUCK
 
R1 MASTER's Avatar
 
Join Date: Oct 2007
Location: Illinois
Posts: 2,704
 
to YFN

Why do you want to disconnect the o2 sensor?

Just follow the wires from the o2 sensor up to the wire loom and disconnect it. If your going to remove it, you will need plug to put in the hole where the o2 sensor was.


Ride safe.

R1 MASTER is offline  
 
post #4 of 5 (permalink) Old 04-09-2009, 09:51 AM
FZ6 fazer user
 
Join Date: Mar 2009
Location: semarang,indonesia
Posts: 44
 
not only r1 master but also FZ1 master its seem..
monyong is offline  
post #5 of 5 (permalink) Old 04-09-2009, 05:19 PM
Administrator
 
R1Lover's Avatar
 
Join Date: Oct 2007
Location: California
Posts: 4,770
 
There is no need to disconnect the 02 sensor, you will notice nothing and there will be no gains in doing so. If your just looking to get it off the bike for whatever reason, you can just unplug it under the tank, then as mentioned find a plug to fill the hole.

R1Lover is offline  
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Forum : Your Yamaha Motor Products Community & Resource forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
How To: Disable Lean Angle Sensor (07-08) R1 R1 MASTER Mechanical / How To 35 04-04-2013 10:24 AM
lean sensor ford351sickness YZF-R1 3 01-06-2009 10:46 PM
oil light and sensor bmgear General Bike Discussion 1 12-24-2008 09:20 PM
07-08 Yamaha R1 computers and O2 sensor skipper06 General Bike Discussion 16 03-28-2008 08:40 AM
How-To Remove Stock Exhaust, o2 Sensor, and EXUP cables !Ron Mechanical / How To 0 10-30-2007 06:25 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome