Ok just Got a Few pics back on the Computer so heres Whats Done so Far!

Will update later, I have to Resize a bunch of Pics!


Re-Build Parts needed.
1) Sub-Frame(OEM){Installed}
2) Right Headlight(OEM){Installed}
3) Nose fairing, Right Side: Lower and Mid. ( Only Rashed, Now New Track Plastix)
4) Front Fairing Stay(C.F.){Installed}
5) Steering Damper(OEM){Installed}
6) Rearsets (if you dont know gotta wait)

Performance and Visual Mods.
1) 2008 R1 Raven Fairing Kit.( Enroute)
2) Rizoma Rearsets (Black W/ Silv Pegs){Installed}
3) Pazzo's Shorty's (Black w/ Silv. adjuster){Installed}
4) Driven Clip-ons (Black){TBI}
5) Driven gel Grips ( Free w/ pazzo's Short time Only @ MR.Cycles.com){TBI}
6) A&R Race baffles ({TBI}...Waiting on Y-pipe & PCIII)
7) Carbon Fiber Front Fairing Stay{Installed}
8) Carbon Fiber Ram Air tubes.{Installed}
9) Carbon Fiber Gas tank Side trim panels. ( top Cover, F/R Fenders coming soon)
10) Harris Gas Tank Cap. (Returning to Buy the HAFER just for Stresco!)

Jeeze, let me take a Breather!

11) SportBike Frame Plugs (Found on TBF. or Ebay...very clean mod imo){Installed}
12) Clear Alternatives Intergrated tail. (Smoked){TBI}...
13) Pass pegs W/ LED Blinkers.. (Powder coated Black){enroute}
14) Custom LED Dash Swap From Blue to GREEN..(My Favorite ){Installed}
15) Puig D.B. WindScreen
16) LP Carbon Fiber Frame Sliders ( LOL, think i'll try em out this time)
17) LP Flushmount Blinkers (Smoked)
18) Fender Elim Kit ( E-bay BS)
19) Carbon Fiber toe gaurd
20) Carbon Fiber F/R Brake Ressy Caps
21) GTYR R1 Carbon FIber Tank Pad
22) GYTR Carbon Fiber triple Cover ( New Triple Coming soon)
23) C&G's Mirror Block off's.

Gunna Stop for tonight, this is getting Boring, Still more to come though !




Will have More pix Soon ......

Oh Yeah, this is how i feel right now!


jnw 1 481.JPG

jnw 1 488.JPG

jnw 1 483.JPG

jnw 1 489.JPG

Damn J$ ! You def going all out. Cant wait to see the progress pics.

nice.

Thanx, Im tryin to,Should be done soon!
I Have alot to Resize and Post still but, Cant do it here at work!

Thank you Gustavo Sun!

You better not be stunting this bike after all this....

Probly wont even lift up the Front..(on pourpose)

This is My newly Installed, Anti-Wheelie Device...
7) Carbon Fiber Front Fairing Stay{Installed}
Dont want this Baby to Crack!

Sweet!

Thanx Squid!

Watch that carbon stay though, I've seen quite a few broken one's

Wasnt that Pricey anyway!
and I Know gunna have to lay off the Wheelies!

I Craddled that bish like a Baby while Installing the headlights!
It felt so Fragile, but I love it! and you can hardly See it. Its really only there for me
and for the REAL enthusiasts to point out!

Ok new Update!
got some plastics in today!

Swapped Dampers, Installed Nose , Windscreen and Blockoffs!


Damn, this 1st Pic is So Crispy & I didnt even Put the Clipons on yet!
#1.jpg

Kinda Missin the Blue there a Bit...

#2.jpg

But Im a Raven R1der Now Bish's!

#3.jpg

#4.jpg

My Boys 07 ZZr600 in the back!

TC9VK6CAJ5H751CA5VHPR6CA04Z6GICA4F3KH9CA5S4X25CANEPOPDCA20RZ4ECAILILQACALSV01VCAPJXGRKCA0B4KP3CA.jpg

Looking good, the beast is coming back...

Thanx Brutha!

Are you serious about the ?

Yeah Coming soon!
Its going in when I Get the Baffles, Y-Pipe, Smog Blox, New Pipes & PcIII Intsalled..
I'll call it my Phase 2 Mods!

sweet...i got the mps dry nitrous kit from mccoys and still have yet to hit the button...i actually have forgotten all about it

Well i dont think i'll be forgetting i have it!
it will be put to good use, If i wanted a purge kit would i have to get 2 bottles?

Still waiting on Rearsets....

And both side panels are on B/O for a few weeks, So i'll be riding
her as naked as the Fz1, that wouldnt cause any issues would it ???

if you want to add the purge valve you dont need an extra bottle but your gonna be suprised at how quick you can empty your tank

the only issue with riding around without your fairings is that you have to tie up the turn signal wires...i used to do it all the time i kinda like the way they look without fairings for some reason

I modified the tail of my bike and hid the nos bottle inside the "glove compartment" so nobody can ever tell that its there...its hidden so well i forget i have it oh and my GO!!!!! button is the starter switch

You'll be fine J, but like Wicked said, it'll go fast! I have mine wired into the horn button and a 2 way switch. No fairings should be fine, I'll let ya know when they come in!

Some pix From the Ride Yesturday!
Thanx again Cap For all your help!
I never took pix of the Box, i told you came in Broke...
Didnt find anything wrong except the Faring looks a little
Bent under the sticker, its nearly unoticable unless you a Freak..(like me) so I dont care and I dont expect to Send it back for another one..Im happy the Bikes Fine.
and Runs great!

We had a Blast yesturday with a 500+ Mile Trip!



DSC00244.jpg

Noticed this morning, That the Rim Looks bent in this Pic...
Im not Sure, i didnt notice it yesturday but From the pic it does!

DSC00221.jpg

DSC00227.jpg

DSC00235.jpg