yamaha grizzly that just keeps quiting - Yamaha Forum : Your Yamaha Motor Products Community & Resource
The Banter Room General discussion of anything.

 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 07-31-2008, 05:43 PM Thread Starter
 
Join Date: Jul 2008
Posts: 1
 
yamaha grizzly that just keeps quiting

Hi everyone, i am new to this site. i have a problem with my grizzly and am hoping that someone out there can help me fix it. I bought a 98 600 grizzly back in march and still havent gotten it running right. ive put 1000 bucks into it in parts alone, new clutch, coil, carb kit, etc, etc... the problem i am continuously having is the bike backfires and quits after it has heatened up and been riden for a few minutes.... after waiting a few minutes it will start up and run for a few more minutes before quiting again.... ive redone the carb, flushed out all the lines, changed coils, new battery, and so on. i dont think the cdi is bad, but i am running out of parts to change. does anyone know what could be the problem. Thanks and i appreciate any help you can give me. Wade
wader_25 is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 07-31-2008, 06:53 PM
APPALACHIAN-AMERICAN
 
KWComp's Avatar
 
Join Date: Oct 2007
Location: Flint Town
Posts: 2,173
 
How does it run up until then? Does it back fire all the time, pop through the carb at all?
KWComp is offline  
post #3 of 4 (permalink) Old 07-31-2008, 07:08 PM
time in a bottle
 
macattack's Avatar
 
Join Date: Oct 2007
Location: indiana
Posts: 1,349
 
not sure this is the answer, but some years for the grizzly had heat issues causing the fuel to boil, then quit running. My 03 had this problem and the dealership had to install a heat shield and vented side covers.
obviously the two models are not exactly the same (98 -600 & 03-660) but there could be a missing heat shield or some change that has been unintentionally made to the atv that has caused a similar problem to the one I experienced.
I am in no way guessing this is your problem I just thought I would give some insight through personal experience.
the grizzly atv's in general have too much heat and poor venting under the tank so It is a good place to look.

David
macattack is offline  
post #4 of 4 (permalink) Old 01-16-2011, 07:20 PM
Junior Member
 
Join Date: Jan 2011
Posts: 3
 
valve seals would be something else to look at my 07 grizzly 700 efi did the samething and im a mechanic and i pulled the motor changed the valve seals and it worked like a charm
A rab is offline  
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Forum : Your Yamaha Motor Products Community & Resource forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Help! 08 Grizzly 350 wont run right?! griz350 General Bike Discussion 11 02-28-2012 08:11 PM
NO LUCK 700 Grizzly brake bleeding fishfinder6 General Bike Discussion 1 07-02-2010 03:30 PM
Question: could you put manual gears on a grizzly? WolverineSport General Bike Discussion 2 05-18-2010 08:49 PM
98 grizzly 700 efi frosty420 The Banter Room 0 04-26-2010 06:55 PM
04' grizzly 660 speedometer problems..?? kepo425 Mechanical / How To 0 03-28-2009 02:37 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome