yz85 parts [Archive] - Yamaha Forum : Your Yamaha Motor Products Community & Resource

: yz85 parts


nhjake
08-04-2009, 05:09 PM
hey guys!

I'm new to the forum so let me know if I'm in the wrong section.

Well i just bought a 2004 yamaha yz85 and i need some parts for it. Ive been riding a pw80 before this lol. ok so here are the parts i need.

-clutch lever, cable, and perch
-cylinder
-cylinder head
-throttle (not the cable)
-chian
-air filter

if you have any these parts pm me with your price.

i will not be able to pay until i get back from vacation.(16th or 15)
.

thanks!:mrgreen

-jake

R1Lover
08-04-2009, 07:07 PM
If you have no luck with the people here on used parts, give MR Cycles a try, they have great prices for the members here on new parts.

nhjake
08-04-2009, 07:34 PM
ok thanks ill prolly go there if i dont get any replys.

-jake

nhjake
08-11-2009, 07:02 AM
hey guys. really need the parts if you have any of them please tell me! im looking to get this running asap! thanks -jake

fastrac
08-13-2009, 11:18 AM
I Have TONS of Parts, we are moving out of YZ 85'S
Scott
sjsaunders@verizon.net
509 943-2870

08 Yamaha 85,only 9 hours. w/Race Tech Gold Valve forks. Barnett Clutch, DID, 756, Fully serviced, Perfect Condition $2000.00
NEW PARTS:
Factory 909, Handlebars In Package, $45.00
Factory 909 Clutch Perch and Lever Assembly Plus 2 More 909 Clutch Lever, $90.00
Factory 909 Brake Lever, $15.00
Renthal Kevlar Grips, 4x, $15.00 ea
NGK BR8EG, 2x, $4.00ea
NGK BR9EV, 2x, $4.00ea
NGK BR9EIX, 2x, $7.00ea
NGK BR10EIX, 4x, $7.00ea
OEM Clutch Pressure Plate, 3x, $15.00ea
OEM Clutch Hub, 2x, $30.00ea
Barnett, Carbon Fiber Clutch Kit, $95.00
OEM Inner Case Clutch Gasket, 3x, $8.00ea
DID Chain, 428-138, 4x, $25.00ea
OEM, Chain, New Take-Off, $10.00
Moose, Rear Wheel Bearing and Seal Kit $12.00
OEM Rear Wheel Bearing Seal, 2x, $2.00ea
OEM Rear Wheel Bearing Circlip, $1.00
Sprocket Specialists, 14t, 3x, $12.00ea
Sprocket Specialists, 49t, Titan Tough, Black Anodized, $50.00
OEM Sprocket, New Take-Off, 47t, $25.00
FMF, Performance Silencer Packing, $10
OEM, Head, Nuts & Washers, $50.00
Wiseco, Pro Lite Piston Kit, Stock, $60.00
Wiseco, Pro Lite Piston Kit, 2mm Over, $60.00
Wiseco, Piston Ring, 2mm Over, 2x, $10.00
Wiseco, Piston Ring, Stock, 2x, $10.00
OEM, Needle Bearing, 2x, $10.00
OEM, Base Gasket, Cylinder Guide Pin, $5.00
OEM, Gas Line Clip
OEM, Float Bowl Hose & Clips, 2x, $1.00
OEM, Drain Plug Bolt, $2.00
OEM, Tank Bolts, Short & Long, $1.00
Twin Air, Air Filter, $15.00
Dunlop, Front Tire, 739, 2x, $30.00
Dunlop, Front Tire, 755, $30.00
Dunlop, Rear Tire, 773, $30.00
Dunlop, Rear Tire, 756, 2x, $30.00
MSR, HD Front Tube, $10.00
MSR, HD Rear Tube, 4x, $10.00
MSR, 16” Rim Strip, $1.00
Fox, Race frame, Chest Protector, M, $115.00
Fox, Kidney Belt, Youth, $15.00
Fox, Pawtectors Black, Size, $15.00

UESD PARTS:
Bike Shipping Crate $75.00
Barnett Clutch, Complete Assembly $200.00
Varner Ported Cylinder only 2 hours $325.00
Varner Ported Cylinder, 2mm Over, $375.00
Varner Milled & MOD head, $100.00
FMF SST Pipe, $80.00
FMF Titanium 2 Silencer, $60.00
FMF Prowercore 2, $50.00
Boyesen Rad Valve W/ Extra New Boot and Gasket. $65.00
Carb, Bored to 29.8mm Jetted And Works Perfectly. $150.00
Twin Air, Filter, 5x, $5.00
OEM Air Box Mud Cover, 2x, $5.00
Exhaust Wash Plug, $2.00
OEM, Ignition Cover, $10.00
Fastway Adjustable Footpegs, F6, $75.00
Shock, Gold Valve, 95-110lb, $150.00
GYTR Carbon Fiber Fork Guards. $20.00
OEM Fork Caps, MODIFIED Pre-Load, -3mm, $20.00
Pre-Load Washer, 1.5mm, Four, $2.00
Dunlop Rear 756, 2x, $10.00ea
Dunlop Front 755, $10.00
Dunlop Front 756, $10.00
Excell Rims, Front & Back, Black, $125.00
OEM Sprocket, 47t, $20.00
Sprocket Specialists, 48t, Titan Tough, Black, 3x, $25.00
OEM Front Brake Pads, $5.00
DID Gold Chain, 2x, $10.00ea
Rear Tube, $3.00
Factory 909, Handlebars, $25.00
Renthal, Handlebars, $25.00
Factory 909, Crossbar Pad
OEM Crossbar Pad, 4x, $1.00
OEM, Clutch Cable, $10.00
OEM, Throttle Cable, $10.00
Gas Cap Vent Cap, Silver, $1.00
Gas Cap Vent Cap, Blue, $1.00
Motorsport, Starting Blocks, $25.00
Flywheel Puller, $5.00
Moto Concept Work Pad, $75.00
OEM, Dampening Rod Holder, $30.00
FMF, BMX Bicycle, 20”, Red & White, $200.00
Alpinestars, Tech 4 Boots, Size 8, Youth, $35.00
Fox, Knee Pads, Youth, $10.00
Fox, 360 Jersey SFX, Size M, Black, $5.00
Fox, 360 Jersey SFX (M) & 360 Pants (28), Pinstripe, $50.00
EVS, Elbow Pads, $10.00
EVS Kidney Belt, Small, $15.00
Soft Helmet Cases, 3x, $3.00ea
Scott Goggles, No Sweat Xi LS, w/Case 2x, $25.00ea
Works Lens, Clear, 4x, $6.00
Works lens, Rose, 2x, $6.00
Works Tear offs, Approx 20, $10.00
Pants Hip Pads, 8 pairs, $2.00ea

Really Used Parts:
Sprocket Specialist, Tighten Tough, Rear Sprocket, 47t, $5.00
IRS, Rear Tube, $1.00
OEM, Inner Case Gasket, $1.00
OEM, Front Brake Lever, $2.00
OEM, Seat With One Inch Tear, $30.00
OEM, Radiator Shroud, $5.00
OEM, Front Brake Assembly, Needs Fork Mount, $35.00
Troy Lee Designs, Pants, Blue, Size 28, $20.00
Fox, Air Frame, Size Small, $10.00
Kidney Belt, Small, $10.00
Front Sprockets, 14t, 3x, $5.00ea
Wiseco, Pro Lite Pistons, Stock, 2x, $10.00
Wiseco, Pro Lite Pistons, 2mm Over, $10.00
OEM, Chain, $5.00

Feel free to Call, or Email with any questions, comments or pics.
509 943-2870 sjsaunders@verizon.net

fastrac
08-14-2009, 07:58 AM
I got a bunch of yz parts. we are moving out of yz 85. got most everything on your list, Posted a list in he but I have not be a member long enough so It was taken down.

nhjake
08-14-2009, 08:20 PM
I got a bunch of yz parts. we are moving out of yz 85. got most everything on your list, Posted a list in he but I have not be a member long enough so It was taken down.

what can you give me for 150$ i definatly need the cylinder and cylinder head.

macattack
08-14-2009, 09:15 PM
I put the post back up , the rules are meant to protect people but are meant to be bent sometimes. :beer

nhjake
08-15-2009, 05:15 AM
thanks macattach.

yeah ill take some of these parts. ill call you later on today if thats ok.

thanks

-jake

nhjake
08-21-2009, 01:24 PM
hey guys. im still looking for a cylinder and head.

nhjake
08-22-2009, 04:27 PM
bump. still need a cylinder

nhjake
08-24-2009, 12:37 PM
still need a cylinder................

nhjake
09-08-2009, 05:09 PM
all i need to running is a cylinder and head. if you have one tell me. ill buy it off you:)

fastrac
09-11-2009, 08:18 AM
Did you find a cylinder Yet? Because I MIGHT be able to help.

nhjake
09-11-2009, 07:24 PM
Did you find a cylinder Yet? Because I MIGHT be able to help.

nope not yet.

nhjake
09-11-2009, 07:30 PM
Did you find a cylinder Yet? Because I MIGHT be able to help.

ive been looking but there hard to come buy for a good deal.

fastrac
09-12-2009, 09:10 AM
Prepare to get a good deal... How does FREE Sound to you.

nhjake
09-13-2009, 04:59 PM
Prepare to get a good deal... How does FREE Sound to you.

thanks! i cant believe you found me one for free!

macattack
09-14-2009, 04:30 AM
Prepare to get a good deal... How does FREE Sound to you.

very nice :beer