well yes finally its here my full out OHLIN race suspension.

front 25mm front cartridge (FGK134 ohlin) with race valves
TTX36 rear shock

here enjoy it.

OMG :drool


Very nice mod....

SaaaaWWWWWWeeeeeTTTTTT

more and more and more :lol

OMG!!!!!!! JEEZ!!!!!!!!!!

i didn't even get a chance to finish posting and you guys are already here :lol

looks good sweetie...

OMG :drool


Very nice mod....

sank u sank u sank u mi friend :lol

very nice mod to the race bike. ohhh and the APE cam tensioner is in too :mrgreen

Sweet! :pimp


Ride safe.

thanks again. i guess i posted this shit so i can say thanks all night :dunno

:lol if not it would be rude :lol

looks good sweetie...

WTF!!!!!!!!!!!!!!!!

what are you doing here :lol


that shit is scary :oh



:rofl :rofl :rofl

hey sweetie.

:bow:bow:rock

sank u sank u fuck this you guys know :lol


:crash

thanks again. i guess i posted this shit so i can say thanks all night :dunno

:lol if not it would be rude :lol



WTF!!!!!!!!!!!!!!!!

what are you doing here :lol


that shit is scary :oh



:rofl :rofl :rofl

hey sweetie.


damn i didnt know i was scary...:moon

So is that one of those hydraulics that goes up and down based on the music beat? :lol

:rock

:cool

thanks guys, im loving my set up

thanks guys, im loving my set up I guess I would too!!!!!!!!!!!! Vey cool!

Looks good mang! Isn't that knob almost touching the exhaust tho?

Well how does it feel? And where did you get it from? I want the same setup...

looks like it's time to head to the track!

very nice :cool

sweet setup skip:bow

Nice upgrades!! :thumbup

nice brudda:D

Looks good mang! Isn't that knob almost touching the exhaust tho?

thanks bro and yeah i know i have to see what i do about that.

Well how does it feel? And where did you get it from? I want the same setup...

well i have not riden the bike that much because its a race bike so i dont ride it on the street, but for what i tested the night of the install around the block, well that shit is awesome.
i bought it from MIKE thermosman (770 500 6445) if you actually do decide to buy it and is not bluff then tell him that Gus from FL recomended you.

looks like it's time to head to the track!

very nice :cool

not track but race ready.
ill be in homestead speedway on dec 2, for the last race of the CCS season :mrgreen

sweet setup skip:bow

:lol thanks

Nice upgrades!! :thumbup

thanks bro

nice brudda:D


thanks bro :mrgreen

you will be amazed at how it feels and track and how ur times improve with them. too sweet bro. would love to have set of them.

I know you may be mad at me for saying this but that shock doesnt look like it was made for that bike. I dont mean to rain on the parade Im just trying to help. or avoid any problems you may have That shock is not listed in ohlins catalog for that bike, I know that I may be totally wrong I am no expert. I know you are racing and probably know more than I do especially about your bike and racing add ons. the model listed is YA343 just a heads up.1362

I know you may be mad at me for saying this but that shock doesnt look like it was made for that bike. I dont mean to rain on the parade Im just trying to help. or avoid any problems you may have That shock is not listed in ohlins catalog for that bike, I know that I may be totally wrong I am no expert. I know you are racing and probably know more than I do especially about your bike and racing add ons. the model listed is YA343 just a heads up.1362

As far as I know, it's only made for the '06+ R6.

http://www.gravesport.com/cgi-bin/shopper?preadd=action&key=SP__YA639

Very nice!!! Must take some serious pimping on street corners for that dough.

I know you may be mad at me for saying this but that shock doesnt look like it was made for that bike. I dont mean to rain on the parade Im just trying to help. or avoid any problems you may have That shock is not listed in ohlins catalog for that bike, I know that I may be totally wrong I am no expert. I know you are racing and probably know more than I do especially about your bike and racing add ons. the model listed is YA343 just a heads up.1362

true with all you say, that is the 46pxls for the 04-06
i have the ttx36 which is the one for the 07 R1 ;)
its way much better and advance.

Well since you don't have an 07, I think you should donate it to the forum here..... :poke

As far as I know, it's only made for the '06+ R6.

http://www.gravesport.com/cgi-bin/shopper?preadd=action&key=SP__YA639



no u are wrong, they are a bit different.
here is a ttx36 for an R1 but 07

http://www.gravesport.com/Products/images/SPYA638.jpg

Well since you don't have an 07, I think you should donate it to the forum here..... :poke

:lmao


does look like you might need to invest in some ehaust wrap though.

Show Off!! :lol

J/K, Nice ride you got there mang :thumbup

Where are the Ohlïns front ones though ?! :dunno

:whiteflag

Well since you don't have an 07, I think you should donate it to the forum here..... :poke



hey shut up!!!!!!!!!!!!

:mrgreen
i can send you a cookie if you want :crash and it will say ohlin on it. :rofl

Very nice!!! Must take some serious pimping on street corners for that dough.



bro dont take that bike to the strees no more thats a full out race bike.

Show Off!! :lol

J/K, Nice ride you got there mang :thumbup

Where are the Ohlïns front ones though ?! :dunno

:whiteflag



thanks sarah, the front forks are cartridge 25mm ohlins, if i used the forks i can only race superbike and not super sport. so with this set up i can do both :mrgreen

:lmao


does look like you might need to invest in some ehaust wrap though.


i have exhaust wrap i will be doint it today i believe :lol

you will be amazed at how it feels and track and how ur times improve with them. too sweet bro. would love to have set of them.



thanks bro and i shall see how much improvement there is. :mrgreen

here is a pic of the 07 with your shock on. it may help you decide what modifications you want to do.1371

I like cookies :crash


I do think you are going to have some heat issues with the pipe so close though... Let's hope not though.

got it, the exhaust on the 07 in on the out side of the swing arm, on the 04-06 is throught the middle.

Noice Mod Bro....

How's the ride feel now ?

I like cookies :crash


I do think you are going to have some heat issues with the pipe so close though... Let's hope not though.


i dont know, im going to find out with mike thermosman

Noice Mod Bro....

How's the ride feel now ?

that shit is gangstar :lol

that shit is gangstar :lol

I Could imagine, Must be like riding on a cloud...:mrgreen

I Could imagine, Must be like riding on a cloud...:mrgreen


:yes :rofl

nice and skipper all you need now are some brembo calipers :)

the ohlins shock is BADASS, have been running one on our k7 and don't have one complaint. the ohlins fork we did later and on the street you don't notice the fork all that much, but the rear shock is very noticeable imo

Why can't I get one of those cookies saying Ohlïns on, me too ?! :cry

aftermarket suspension is the way to go! Very nice setup :yes

My bike was a different bike altogether after the suspension upgrades. You will be pleased

Great mod :thumbup

nice and skipper all you need now are some brembo calipers :)

the ohlins shock is BADASS, have been running one on our k7 and don't have one complaint. the ohlins fork we did later and on the street you don't notice the fork all that much, but the rear shock is very noticeable imo



so........ will you drop the price for me :rofl
dont hurt to ask :lol
i know ill be doing that later on, first i want to do the BREMBO MC, still dont know if i want the 19x18 or 19x20
the 18 says it better for 4 piston caliper and bla bla bla
19 for 6 piston caliper bla bla bla
which one will work better for my aggressive racing enviroment, i love to brake late but with out a good set of brakes, man let me tell you it gets scary some times

and i need to know very soon because im racing dec 2 in homestead speedway, so yeah im gonna need brakes. its a very but very fast track.


Why can't I get one of those cookies saying Ohlïns on, me too ?! :cry


not one but two im going to give you with a lil candy that says ohlin too.




================================================== ================================================== =====




NOW
im such a freaking gangstar that i fixed the problem with preload adj being to close to pipe.
the preload adj is bolted to circular clamp that wraps around the oil reservoir of the shock. the clamp is tighten by a 4mm, loosen it up a bit twist up the clamp and buala the preload adj is now like 3/4 of an inch away from the exhaust :mrgreen
ill post some pics tomorrow.

not one but two im going to give you with a lil candy that says ohlin too.

:hooray