02-03 R1 Mechanical/Tech Info [Archive] - Yamaha Forum : Your Yamaha Motor Products Community & Resource

: 02-03 R1 Mechanical/Tech Info


R1 MASTER
11-05-2007, 11:00 PM
If you have questions or information that you feel would be helpful regarding 02-03 R1's mechanical/tech info, then post it up.


Thank you,


General Torque Spec: (02-03) R1
Front Axle: (65 FT LBS)
Front Axle Pinch Bolts (13 FT LBS)
Front Brake Caliper: (29 FT LBS)
Steering Stem Nut: [top triple tree] - (83 FT LBS)
Rear Axle Nut (108 FT LBS)
Rider Footrest Bracket: (20 FT LBS)
Passenger Footrest Bracket: (20 FT LBS)
Drive Sprocket Nut: (61 FT LBS)
Rear Sprocket Nuts: (50 FT LBS) [Service manual calls for 72 FT LBS but this is incorrect.]
Front Engine Mounting Bolts: (33 FT LBS) [This is normally where your Frame Sliders mount.]
Rear Engine Mounting Bolts: [upper and lower] – (36 FT LBS)
Front & Rear Brake Disc: (13 FT LBS)


Stock Chain/Sprocket Info:
16 Front – 43 Rear - 114 links – 530 Pitch


Oil Change Info:
Recommended Oil Viscosity: 10W30 or 20W40
Oil Drain Bolt: (31 FT LBS)
Oil Change Without Filter Replacement: (3.07 QT’s)
Oil Change With Filter Replacement: (3.28 QT’s)


Ride safe.