Tools Needed: Needle Nose Pliers.

Step 1: Rotate clips around, so you have access to them.
http://www3.mediafire.com/imgbnc.php/a286702f8532c0642f366bfc8d736d056g.jpg (http://www.mediafire.com/imageview.php?quickkey=amzzuuxkxxx&thumb=4)

Step 2: Remove clips: (07-08) 4 on each side. (98-04) 2 on each side.
http://www1.mediafire.com/imgbnc.php/1763283a976d6be62fcdf06e22f9d5206g.jpg (http://www.mediafire.com/imageview.php?quickkey=1djz9nipwkl&thumb=4)

Step 3: Remove Pins: (07-08) 2 on each side. (98-04) 1 on each side.
http://www1.mediafire.com/imgbnc.php/4b1817f8570efa2ba7f3d5bfc547081c6g.jpg (http://www.mediafire.com/imageview.php?quickkey=4ioq7tt0dqj&thumb=4)

Step 4: Remove Spring: (07-08) 2 on each side. (98-04) 1 on each side.
http://www2.mediafire.com/imgbnc.php/5154d037b811f3169ca0649a0916fbc26g.jpg (http://www.mediafire.com/imageview.php?quickkey=5dgymx1ltm2&thumb=4)

Step 5: Pull pad out slightly and push on the alignment hole area to push the piston back in the caliper.
http://www1.mediafire.com/imgbnc.php/2452a52db57a934023651f3a373635ed6g.jpg (http://www.mediafire.com/imageview.php?quickkey=2qydjgoverz&thumb=4)

Remove old brake pads.

Install new brake pads.

Reverse process to reassemble.


Ride safe.

Where have I seen this done before??? :sing

Where have I seen this done before??? :sing


Once or twice maybe.:hammer:hammer:hammer

:helloBro.


Ride safe.