I ask this question on the other forum before they became disabled. But anyways, has anyone ever installed a gear indicator on there R6? I bought one from a friend for $20 that he did not want to install on his bike cause he was scared. It's a Digital Gear Indicator from http://store.58cycle.com/product_p/digitool.htm I wanted to try it and also to remind me that there is NO 7th gear on my R6 :rofl Anyways has anyone done this or seen a write up that can help me. Thanks in advance.

I've installed an Acumen gear indicator on my bike, it's probably similar to digitool. Is the digitool plug and play?

I'm not sure if it is plug and play because the end of the wires are cut (that is how they came) and the instructions just tells you what the wire are and what it should connect to. Maybe if I can see a detail instruction with pics of what I should be looking for I can do it. But for now I will leave it alone, so that I don't short or fry anything. I've never taken the front instrument on the bike apart and I don't know where to start.

Ask Wheatman. I am pretty sure that is the indicator he put on his 07 R1. I am sure he will help you out.

it's not plug and play. You can make it work, but a plug and play acumen would be tons easier...

I wish my Acumen worked :( I had it maybe 8 months and it quit working. Still plugged up now :lol

They should really start Coming stock in 09...
and should have been since 04!

Thanks I will give Wheatman a PM later. Hopefully he will still have a write up or anything that can help me. If not I will just keep it until I can find someone that can help me with it. And that Acumen looks alright, but for $140 I can deal with not knowing what gear I'm on. I'd rather spend it on something that will give me a little power towards the bike. Thanks everyone.