Post up your bike and all the mods in a post (include pics), we will then pick bikes from this thread to include on the front page home page, we will change this up every month as a "Members Bikes" feature on the main page here www.yamaha-forum.net

Out of curiosity, do yo want only current bikes? Or, can we post up our past bikes and the mods as well? :dunno

mods=lockwire on the handgrips!:mrgreen

2007 Yamaha YZF-R1

I wanna be famous. LOL


Exhaust CF slipons - (Akrapovic)
Y pipe - (Akrapovic)
Power commander III-usb - (dynojet)
Custom map - (LVDynoTech)
Air filter - (bmc)

Rear wave rotor - (galfer)
SS brake line ~ rear - (goodridge)
SS brake line ~ front - (goodridge)
Levers : long clutch~short brake- (pazzo)

CF triple tree protector - (GYT-R)
CF clutch cable cover

Flush mount front signals
Rear integrator - (clear alternatives)
Rear turnsignals
Engine cover : LH - (woodcraft)
Engine cover : RH - (woodcraft)
Rear cowl - (GYT-R)
Frame sliders - (graves)
Clutch slider - (graves)
Fender eliminator
Windshield smoke - (Puig)
Tank protector - (ProGrip)

Garage door opener - (genie~stealth mounted)
Speed-o-healer
Alarm – (Scorpio SR-I500sw)

"R1" license plate

2007 Yamaha YZF-R1

I wanna be famous. LOL


Exhaust CF slipons - (Akrapovic)
Y pipe - (Akrapovic)
Power commander III-usb - (dynojet)
Custom map - (LVDynoTech)
Air filter - (bmc)

Rear wave rotor - (galfer)
SS brake line ~ rear - (goodridge)
SS brake line ~ front - (goodridge)
Levers : long clutch~short brake- (pazzo)

CF triple tree protector - (GYT-R)
CF clutch cable cover

Flush mount front signals
Rear integrator - (clear alternatives)
Rear turnsignals
Engine cover : LH - (woodcraft)
Engine cover : RH - (woodcraft)
Rear cowl - (GYT-R)
Frame sliders - (graves)
Clutch slider - (graves)
Fender eliminator
Windshield smoke - (Puig)
Tank protector - (ProGrip)

Garage door opener - (genie~stealth mounted)
Speed-o-healer
Alarm – (Scorpio SR-I500sw)

"R1" license plate

nice bike....and nice plate too....

Any bikes are fine fjorn... I'm just looking for other bikes to showcase on the front page and let the members know that this site is for them.... :) and they are all part of it. :)

:beer

my old 05.....i miss it....:cry:cry:cry

Akra Race full system, pc3, BMC, -1 in front, integrator, flushmount, bar end mirrors...etc...etc....

Hopefully I'm getting rearsets and a new camera this Christmas so I'll have all sorts of new pics!

gixxer allowed..?? lol....

gixxer allowed..?? lol....

:ban !!!


Just kidding.

Post it up! Guys here are pretty cool, they shouldn't flame you too much. :P

Smoked Puig Windscreen
Pazzo Shorty Levers
Driven Grips
Rizoma Bar Ends
GPR Damper
Scorpion Exhaust
Factory Pro SuperFlare Velocity
Stacks Factory Pro Ignition Advancer
Graves Slide Stops W/ FPB
Dynojet PC3 USB (with custom map)
BMC Race Filter
Lockhart Phillips Integrated Turn Signals
Rear Fender Eliminator With New Blinkers
Targa Seat Cowl
Harris Exhaust Hanger
Lockhart Phillips Frame Sliders
Black Sato Rearsets
520 Conversion -1/+0
Drive Systems Sprocket
EK 520 MVX Chain
Custom Tank Pad
MotoMummy Fire Reservoir Sock

The list goes on. Cant remember the rest :)

:ban !!!


Just kidding.

Post it up! Guys here are pretty cool, they shouldn't flame you too much. :P

:mrgreen:mrgreen

nice 07 you got there....
can u tell me hows the sound of yoshi..?? loud or not..??

my old 02 with a couple CF bits and a touch of Ti :lol

couple more :jiggy

mods to date- 01/26/2012

2002 R1- 998cc
Custom paint: Dupont light silver pearl with med gray pearl mids
Custom striped CF fenders front/rear
Custom logo's/sigs & MotoGrafix number plates
Marchesini forged aluminum rims
PFM full floating iron rotors
K-Factory Ti MotoGP canister with Sato Ti link pipe and Sato Ti hanger
Ohlins damper & mount
Acumen digigear & programmable rev light with ano billet cases
Spiegler SST lines front/rear
Rizoma reservoirs front/rear
Gilles chain adjusters & lifters
Harris adjustable rearsets
Graves return spring
Harris clutch & frame sliders
Greggs LED flushmount & SST barends
Kellermann LED rear indicators & LED plate light
Sato delrin rear spools
DID 520 ERV2 chain & Drive systems sprocket (+2/-1)
Yamaha rear cowl
Pazzo shorty levers
BMC air filter
Scotts billet oil filter
Oil quick changer drain system
Woodcraft ano stator case cover
ValterMoto steering stem nut
STM oil fill cap
Kyle Racing preload adjusters

Carbon fiber- Clever Wolf Racing
Tank protector

Carbon fiber- Dynomite
Front V-Panel
Front Fender
Upper infills
Rear plate/indicator bracket
Front sprocket cover

Carbon Fiber- Magical Racing
Long rear hugger
Swingarm covers
Shark fin
Tank sides
mirrors
Supercoat iridium CF stepped screen

Carbon/Kevlar- BikeJohnny UK
RH clutch case cover

Carbon Fiber- Harris
Frame covers

Carbon Fiber/Billet- MotoWheels
Carbon Fiber/ano billet 1/2 turn gas cap assembly

Titanium- Pro Bolt/Yoyodyne
All rotor bolts
Fork pinch bolts
Front fender bolts
All caliper bolts
All triple tree and control fasteners
All damper bolts
All rearset bolts
All engine casing bolts
Rear caliper pin slide bolts
Rear fender bolts
All slider & spool bolts
Threaded bodywork fasteners
Subframe bolts
All reservoir bolts
Front/rear axle nuts/bolts
Windscreen bolts
Exhaust bracket/hanger bolts
Sprocket nuts
Barend bolts
Dzus (D-Ring) bodywork fasteners

* Update- In fabrication at present
One-Off CF kickstand
One-Off alloy endurance swingarm chain holder

Will update more as I remember (its what happens when your my age) (60+ yrs. old now) the other bits :old

Do Site Supporters Count??? :mrgreen

2006 R1
Mid Michigan MotorsportsCustom Braced Swingarm
Ohlins R&T Forks
Ohlins Shock with Superbike valving
AP Racing Billet Front Calipers
AP Racing Front Rotors
AP Racing GP spec Variable Bore M/C
Galfer Rear Wave Rotor
Spiegler Stainless Brake Lines
CRG GP Clutch Lever
CRG Hindsight LS Bar End Mirror
Graves Motorsports Rear Sets – GP Shift
Graves Motorsports Full Ti Exhaust
Graves Motorsports Velocity Stacks
Graves Motorsports AIS Plates
Graves Motorsports Engine Covers
Graves Motorsports Bar Ends
Graves Motorsports Bar End Mirror Adapter
Graves Motorsports Frame Sliders
Custom LED Magic Led Lighting
Custom LED Digital Flasher Relay
Custom LED Integrated Tail Light
Cleggs Innovations Angel Eyes
Greggs Customs Fender Eliminator
Greggs Customs Flush Mount Turn Signals
Greggs Customs Mirror Covers
Greggs Customs Billet Sprocket Cover
Mcarbon Carbon Fiber Wind Screen
Mcarbon Carbon Fiber Front Fender
Mcarbon Carbon Fiber Tank Guards
GYTR Carbon Fiber Fairing Ring Inserts
GYTR Carbon Fiber Chain Guard
Power Commander PCIII USB
Vortex Gas Cap
Cox Racing Group Radiator Guard
BMC Race Air Filter
Driven 520 Sprockets
D.I.D. ERV3 520 Chain

http://i115.photobucket.com/albums/n306/kwcomp/06%20R1/snapz3030.jpg
http://i115.photobucket.com/albums/n306/kwcomp/06%20R1/snapz3031.jpg
http://i115.photobucket.com/albums/n306/kwcomp/06%20R1/snapz3056.jpg
http://i115.photobucket.com/albums/n306/kwcomp/06%20R1/snapz3058.jpg
http://i115.photobucket.com/albums/n306/kwcomp/06%20R1/snapz3059-1.jpg
http://i115.photobucket.com/albums/n306/kwcomp/06%20R1/snapz3063.jpg
http://i115.photobucket.com/albums/n306/kwcomp/06%20R1/snapz3064.jpg
http://i115.photobucket.com/albums/n306/kwcomp/06%20R1/snapz3001.jpg
http://i115.photobucket.com/albums/n306/kwcomp/06%20R1/IMG_1620.jpg
http://i115.photobucket.com/albums/n306/kwcomp/06%20R1/snapz2992.jpg

I think I will wait just a couple weeks or so to post mine up! :thumbup :sing

lol....quick, close the door, he found us......:laugh

lol....quick, close the door, he found us......:laugh

:mockJust wait 2 or 3 more weeks!! I'm gonna go picture post crazy!! :yes:mrgreen

I don't think my new bike has a prayer in hell of being on the main page so i'll just bow out of this one :) Good idea with this though r1lover...

Do Site Supporters Count??? :mrgreen

2006 R1
Mid Michigan MotorsportsCustom Braced Swingarm
Ohlins R&T Forks
Ohlins Shock with Superbike valving
AP Racing Billet Front Calipers
AP Racing Front Rotors
AP Racing GP spec Variable Bore M/C



love the bike Kevin . . . a freaking work of art, represents your company well :bow


just need to see that great front end with the AP rotors, they look way more the part IMO (especially with the AP calipers) :yes

Got a whole freaking thread for mine....

Gotta stop the picture whoring at some point...:rofl

hey, i nominate ron's bike to be the 1st bike of the month:fact

btw, this thread should be made a sticky:fact

i will also wait a couple of weeks until my r6 is finished

Stuck :beer

Stuck :beer


well are we gonna vote 2 see which bike is going to be the bike of the month or is it going to be up to the amds?

I was just going to pick one, but if you guys want to vote we can do that as well.

I was just going to pick one, but if you guys want to vote we can do that as well.


nah, i say just pick one. that way it would be alot easier for every1:fact

if you like i could pick them, each month if you like

DID 'Gold' X-Ring 520 Chain Conversion, Lightened AFAM Crank Sprocket & Rear Sprocket Hard Ano'd Black by Driven, Gilles Tooling Chain Adjusters and GP Brackets w/ti hardware, R&G Racing Frame, Clutch and Engine Sliders, Sato Quick Release Clip Ons, Renthal Medium Compound 'Diamond' Road Grips, Graves Motorsports Velocity Stacks, Derestricted Airbox with K&N Air filter, KrankVent w/ Uni Filter Oil Catch, Yoshimura RS3 Carbon Exhaust (track), MCM Custom gp exhaust (street) | Attack Racing Adjustabe Triple Clamp +3 offfset, PCIII usb w/ GNYHUF map, Magical Racing M1 Carbon Hugger, BST Front Fender | BrakeTech Superbike Axis Rotors 320mm, Cryo treated with Yoyodyne Ti Flanged Bolts | Nissin Semi-Radial 6 Pot Brake Calipers with BrakeTech Billet Brackets, Titanium Caliper Bolts | Ferodo Sintered hh Front Brake Pads | ISR 17.5mm Master Radial Pump Brake Lever w/ Variable Ratio Adj., Spiegler Custom Steel Braided Lines, Braking Rear Wave Rotor w/ Ti Hardware, EBC hh rear brake pads, Graves Motorsports Rear Brake Return Spring, ISR Universal Clutch Perch, Brembo Clear Tubing Rear Brake Resevoir, Rizoma Front Brake Reservoir, Ti- Sub Frame Bolts, Ti-Through Axle Cap Bolt, Ti-Pinch Bolts, Ti-Rear Spindle Nut, Ti-Brake Caliper Bolts, Titanium Brake Bleeder Nipple Valves, Inturace Swingarm Sliders, Fabbri Accessori Double Bubble Windscreen (Dark) mounted via Black Ano Ergal Bolts, CS-Racing Aluminum Tach~Fairing Bracket, Attack Racing Rearsets | Attack Racing Reverse Shift kit w/ Billet Bell Housing, STM 'Evoluzione' Slipper Clutch, Blackstone Tek Carbon Fiber Wheels | Michelin Pilot Power 120/70, 180/55, Fluids, Motul: Engine~ 300 V 'Ester' Synthetic, Cooling System~ Motocool 'Expert' Coolant, Brake System~ Motul RBF 600, Scotts Performance Stainless Steel Micronic Oil Filter, Motrax DHC Carbon/Aramid Engine Case Guards, Samco Silicon Hoses and SS clips, Ohlins Dual Speed 46PRXLS Rear Shock, Graves Motorsports Billet Shock Linkage, Yuasa YT12B-BS Battery, Black Ergal Ano'd Dzus Fairing Fasteners, 'SuperBright' Led Parking Lights, Gregg's Custom LED Flush Mount, Libertek F1 Module, Accumen DG8 Gear Indicator in Natural Billet Housing, Accumen PD8 Shift light Indicator in Natural Billet Housing, Integrated CRC Barrac MV Agusta Mirrors, 03 Reworked forks, Hard Ano'd Uppers, sliders Oxy-Ti-Ni Acetyl finish, with Ohlins 25mm valves reworked by Chassis Dynamics, Graves R6 Carbon Fiber Chain Shark Fin, Quick Change Oil Drain Valve.



Ill post new pics later... funny havent I seen you guys before? :lol

KW your bike really is amazing, great work. Way to carry the flag for your biz!

ok, ok, FINE.

:mrgreen

Dylan...that list of mods is stunning....:yes

http://img210.imageshack.us/img210/8940/img0885wz2.jpg

http://img210.imageshack.us/img210/9021/img0898mv9.jpg

Guess it's time to get mine in the mix!! :cool



2007 Yamaha YZF-R1 - Factory Blue
PUIG Opaque Double Bubble Windscreen
Gregg's Customs - Mirror Covers
Gregg's Customs - Fairing Plugs
Gregg's Customs - Bar Ends
Gregg's Customs - Bar End Mirror Adaptor
CRG Bar End Mirror
Acumen Digital Gear Indicator
Pazzo - Gold w/black Adjuster Shorty Levers
Galfer - Black Front & Rear SS Braided Brake Lines
Galfer - Front HH Pads
Galfer - Front & Rear Wave Rotors
Graves - No-Cut Frame Sliders
Drive Systems Front and Rear 520 Sprockets - 16/45
DID ERV3 Gold 520 Chain
Speedo-Healer
Marchesini Wheels - Gold Forged Aluminum
Sato Rear sets – Black
GYTR- Gel Comfort Seat
GYTR - Carbon Look Triple Tree Cover
GYTR - Carbon Look Tank Pad
Graves Smog Block-Off Plates
Dyno-Jet PCIII-usb
Akrapovic Full EVOII Shorty Exhaust (Titanium Canister)
Yamaha R1 BLACK NTS Fender Elim.
Clear Alternatives Tail Light
Marker Lights Converted to Blinkers
Custom Front and Rear Brake Reservoir Caps w/ Yamaha Tuning Fork
GYTR Rear Spools
Front V on lowers painted to match lower panels
Akrapovic Carbon Fiber Heat Sheild
Akrapovic Carbon Fiber Rear Hugger
Akrapovic Carbon Fiber Chain Guard (Custom Cut)
Akrapovic Carbon Fiber Clutch Linkage Cover
Harris Racing Keyless Gas Cap

http://i133.photobucket.com/albums/q60/vmaxman06/MY%2007%20R1/Akrapovic/Akrapovic034.jpghttp://i133.photobucket.com/albums/q60/vmaxman06/MY%2007%20R1/Akrapovic/Akrapovic050.jpg
http://i133.photobucket.com/albums/q60/vmaxman06/MY%2007%20R1/Akrapovic/Akrapovic054.jpg
http://i133.photobucket.com/albums/q60/vmaxman06/MY%2007%20R1/Akrapovic/Akrapovic058.jpg
http://i133.photobucket.com/albums/q60/vmaxman06/MY%2007%20R1/Akrapovic/Akrapovic070.jpg
http://i133.photobucket.com/albums/q60/vmaxman06/MY%2007%20R1/Akrapovic/Akrapovic080.jpg
http://i133.photobucket.com/albums/q60/vmaxman06/MY%2007%20R1/Akrapovic/Akrapovic009Medium.jpg
http://i133.photobucket.com/albums/q60/vmaxman06/MY%2007%20R1/Akrapovic/Akrapovic014Medium.jpg

holy crap B, the bike looks insane with the new akro:bow

holy crap B, the bike looks insane with the new akro:bow


Thanks bro!! It's a work in progress for sure! :yes

This modding disease never ends!! :lol

i hear that:lol

Guess it's time to get mine in the mix!! :cool

those akro's look fookin bad azz on it "B" :bow

those akro's look fookin bad azz on it "B" :bow


Thanks brutha!! :thumbup

Thanks bro!! It's a work in progress for sure! :yes

This modding disease never ends!! :lol

Disease, what disease? :lol :corn

well heres what I got...pics will come later...

2004 Yamaha YZF-R1/YZR-M1

team yamaha blue w/ rossi replica paint scheme
black gilles adjustable rearsets w/gp shift
puig carbon look rear hugger
stainless steel windscreen bolts
modified windscreen
r1 mirror block offs
oxford blue anodized billet aluminum and carbon fiber bar ends
gold crg shorty levers
progrip superbike grips
galfer stainless steel braided lines front and rear
galfer HH brake pads
mccoys adjustable kickstand
shortened graves titanium exhaust w/conical ends
graves velocity stacks
bmc race filter
clear alternatives integrated tail light
custom covers to clean up unused holes
custom rear brake line holder
targa seat cowl
vortex rear spools
progrip carbon look tankpad
custom carbon fiber vanity plate on swingarm
custom fender eliminator w/5 LED license plate light
quick turn throttle mod
-2 front sprocket
blue running lights
powerstands mantis camera mount
hotbodies flush mounts
vortex frame sliders
clutch slider

there may be more but i forget:lol

Disease, what disease? :lol :corn

Dylan...Your's is borderline terminal bro!! :fact :lol :lol

well heres what I got...pics will come later...

2004 Yamaha YZF-R1/YZR-M1

team yamaha blue w/ rossi replica paint scheme
black gilles adjustable rearsets w/gp shift
puig carbon look rear hugger
stainless steel windscreen bolts
modified windscreen
r1 mirror block offs
oxford blue anodized billet aluminum and carbon fiber bar ends
gold crg shorty levers
progrip superbike grips
galfer stainless steel braided lines front and rear
galfer HH brake pads
mccoys adjustable kickstand
shortened graves titanium exhaust w/conical ends
graves velocity stacks
bmc race filter
clear alternatives integrated tail light
custom covers to clean up unused holes
custom rear brake line holder
targa seat cowl
vortex rear spools
progrip carbon look tankpad
custom carbon fiber vanity plate on swingarm
custom fender eliminator w/5 LED license plate light
quick turn throttle mod
-2 front sprocket
blue running lights
powerstands mantis camera mount
hotbodies flush mounts
vortex frame sliders
clutch slider

there may be more but i forget:lol


its later already, wheres the pics:kicknuts

Just getting started but I'm hooked

Boz Brothers MOIRA B2 Series Full Exhaust System
PCIII; cm by UH Motorsports
BMC Race Filter
Custom LED Integrated Blaster X Tail Light
Greggs Flush Mount Front Signals
Puig DB Windscreen Dark Smoke
KR Frame Sliders
CF Clutch Guard
Removed Rear Footpegs
*Building Custom Undertail: kind of a work in progress

http://i181.photobucket.com/albums/x249/kennyw1106/PC020011.jpg
http://i181.photobucket.com/albums/x249/kennyw1106/Rearview3.jpg
http://i181.photobucket.com/albums/x249/kennyw1106/Rearview6.jpg

More to come

gixxer allowed..?? lol....

NO...
:kicknuts

http://i173.photobucket.com/albums/w61/slugbait71/100_7415.jpg my future 06 R1 trackbike starting early:mock

wow...it kinda looks like theres something missing tho...

I cant figure out what it is...hmm:confused


:crash

Can I enter my Suzuki?:mock

YES you can > when I'm done with the newest site... :lmao

it will be later tonight. :)

YES you can > when I'm done with the newest site... :lmao

it will be later tonight. :)Really?:oh

06 R1 50th

Mods...
Puig double bubble black
Pazzo shortie gold levers
Yamaha solo cowl

http://img.photobucket.com/albums/v493/MyYamR7/Land/000_2530.jpg

Nice Collection :welcome

Nice Collection :welcome

Thanks for the welcome.
Got a couple more that don't get ridden to often..

http://img.photobucket.com/albums/v493/MyYamR7/000_0636.jpg

Thanks for the welcome.
Got a couple more that don't get ridden to often..

http://img.photobucket.com/albums/v493/MyYamR7/000_0636.jpg


sweet
:rock
love the pocket bike

my 04

only mods are the yamaha cowl and screen

http://i43.photobucket.com/albums/e366/capisculosa/r1.jpg
http://i43.photobucket.com/albums/e366/capisculosa/r12.jpg
http://i43.photobucket.com/albums/e366/capisculosa/r13.jpg
http://i43.photobucket.com/albums/e366/capisculosa/r17.jpg
http://img385.imageshack.us/img385/8852/cameradump224ym3.jpg

nice...i always wanted the silver paint scheme but ended up with my other favorite, a bluebike converted to a rossi replica...

So does bogie get BOTM every month???
Must be based on number pics posted :rofl :rofl

02 r1

a couple more...

This modding disease never ends!!

No doubt, cuz of this....


2007 Yamaha YZF-R1

I wanna be famous. LOL


Exhaust CF slipons - (Akrapovic)
Y pipe - (Akrapovic)
Power commander III-usb - (dynojet)
Custom map - (LVDynoTech)
Air filter - (bmc)

"R1" license plate
blah, blah, blah, etc., etc., etc.


Look what happened to my 07 R6 http://www.702sportbikes.com/images/smilies/sad5.gif

Nice set up up Walker in Europe no less.... :thumbup

New camera new pics. There lousy but I've never used a DSLR before. I'll learn especially if I end up getting those new rear sets.

http://farm3.static.flickr.com/2100/2283275436_444eedcdf1_b.jpg

http://farm3.static.flickr.com/2247/2283280112_74d5507c14_b.jpg

http://farm3.static.flickr.com/2291/2283291262_fac814662c_b.jpg

thought i'd post a few pics:D

:duh

my 2000 & 2006
http://i173.photobucket.com/albums/w61/slugbait71/Yamaha001-1.jpg

my 02 soon to be racebike...

My 2007 R1...

http://members.shaw.ca/tmccrankr1/R1%20(3).JPG

:rolleyes
http://i188.photobucket.com/albums/z296/blur1ss/IMG_1472_0_1_tonemapped1.jpg

http://i188.photobucket.com/albums/z296/blur1ss/IMG_1452_0_1_tonemapped1.jpg

Nice guys!! :cool

Blur.................. you're a picture whore!! :lol :lol

Nice guys!! :cool

Blur.................. you're a picture whore!! :lol :lol
guity as charged!:rolleyes:thumbup

Sorry,but my bikes arent yamahas(although id love the 2008 R6.That bike is incredible in its build quality,styling and performance)

2004 CBR1000RR,but 2006 bodywork,radiator,harness etc

HRC subframe,battery box and fairing stay,active 1/7 billeted throttle,k-factory engine sliders
fren turbo clutch and brake lines,
HRC gearbox,HRC headwork(ported and skimmed by JSB champion Honda team)
HRC cams,valve springs and ECU
Discacciati rotors,calipers and febur billeted rear rotor,ladybird rear caliper mount,HRC replica top bridge and special reservior stays,beater 24 Litre alloy tank(about 3kgs)
Special pre-preg bodywork commisioned by HMJ(honda motors)very light and trick(and expensive)
marchesini rims,ohlins forks and shock,magical racing stuff(front fender mounted now)TST rear sets.G-craft reservior)akra evo system,special kevlar intake,many titanium bolts and nuts,brembo billeted clutch and special Moto gp spec brake master(from my cbr900)Tachyon clip ons(supply frame parts and all billeted parts on the RC212v)
Special acry-point screen

with the engine work(engine is basically JSB spec)will be well over 180ps at the rear wheel,and bike will be very light(maybe 170kgs?)
Handling ad power is awsome

1997 cbr900
(2000km since total rebuild,so 8000km in total)
Special one off billeted swingarm made by segale in italy
special paoli forks and triple clamps made for this bike
KAD mono bloc 6 pot calipers,febur billeted rear caliper,39mmFCR carbs,One off titanium striker exhaust system,HRC mag front wheel and PVM mag rear,HRC tachyon hub(used on the NSV500R and factory HRC bikes)all titanium bolts made by the HRC supplier(including front axle,engine(internal bolts as well)brembo race floating rotors front and special brembo rear rotor and caliper mount,Mupo rear shock,painted wheels and frame(forgot the process,but its baked on and was expensive to do)harris rear sets,WEISCO high comp 945mm pistons,heads ported,active 1/7 throttle and HRC switch unit i wired on,had kevlar fuel tank but that leaked so i changed back to stock
aitrech bodywork,RVF400 headlights,lightech clutch unit,Tachyon clip ons,
has some other parts added like coerce billeted chain cover,some gold fuel cap,fren turbo lines

next bike i think maybe is a k7 GSXR1000,not really out of choice but maybe should buy one for work purposes...(parts etc)
but i think the 3 way power switch will be really useful for riding in the japanese twisties,be able to tone the power down a bit

next bike i think maybe is a k7 GSXR1000,not really out of choice but maybe should buy one for work purposes...(parts etc)
but i think the 3 way power switch will be really useful for riding in the japanese twisties,be able to tone the power down a bit

love those hondas simon....just rode an 08' cbr1000rr great bike best honda i have ever ridden

WOW simon...your 900 is incredible. I hadn't seen pics of it before.

Two very awesome machines. :thumbup

WOW simon...your 900 is incredible. I hadn't seen pics of it before.

Two very awesome machines. :thumbup


who cares that they're not Yamaha's, both of your bikes a incredable specials :thumbup

Does your Beater tank have the dual endurance fills? Has the new radiator solved the heat issue?

Moto-Works should see about selling those reservoir brackets, nice thin profile & work on just about every bike out there :sneaky

cheers!the 900 is very trick and light(and sounds mean)but now the bikes are a bit over the top and i would love a stock bike so i can enjoy riding instead of worrying of parts falling off etc!
the 1000 has the dual fillers
like to sell the reserviors(they are made by my good friend at ladybird)but maybe difficult i think.
Ron the stock rad is perfect!temp never gets above 104 now and ive wired a switch so can control it(cant use with the HRC ecu so i had to hardwire a switch in)

i hear the new 1000RR is a great bike,but looks like a hyena
I probably will get a K7-8 GSXR1000(i have an awsome beater tank thats been polished and will get a heat magic swingarm)kind of for work purposes,but if i would buy a 08 R6 today.That bike is amazing
at the Red baron down the road they have all the latest sportsbikes.theres a big difference in quality between the suzuki and the R6(and also i believe the K7-8 is worse than the K5-6 GSXR in build quality..)

cheers!the 900 is very trick and light(and sounds mean)but now the bikes are a bit over the top and i would love a stock bike so i can enjoy riding instead of worrying of parts falling off etc!
the 1000 has the dual fillers
like to sell the reserviors(they are made by my good friend at ladybird)but maybe difficult i think.
Ron the stock rad is perfect!temp never gets above 104 now and ive wired a switch so can control it(cant use with the HRC ecu so i had to hardwire a switch in)

i hear the new 1000RR is a great bike,but looks like a hyena
I probably will get a K7-8 GSXR1000(i have an awsome beater tank thats been polished and will get a heat magic swingarm)kind of for work purposes,but if i would buy a 08 R6 today.That bike is amazing
at the Red baron down the road they have all the latest sportsbikes.theres a big difference in quality between the suzuki and the R6(and also i believe the K7-8 is worse than the K5-6 GSXR in build quality..)

working with suzukis every day the k7-k8 are over engineered crap, you cant even bump up the idle with out a lap top and sds, suzuki diagnostic system, i have never been a big fan of suzuki build quality and I have owned a couple of them, the other brand we sell is honda its like comparing a mercedes to a hyundai, yamaha is right up there quality wise they are just built better. the k5-k6 gsxr had some chincy qualitys about but i would take one over a k7 in a heartbeat, a well set up k5 is as good if not better than a k7. the gsxrs over the years were beasts, the 01 came out and was a monster, they changed it in 03 and it was even better so to speak, 05 came over and made the 03 look like a joke, then came the 07 and instead of a step foward it was a step sideways in way wasn't really any better than last years but hey this is just my .02

nice bikes as usual simon :thumbup
while you are here.... do you know if magical racing could make me a 98-99 r1 left and right fuel tank infill panel? and a left and right infill panel behind the headlights? in twill carbon?

next bike i think maybe is a k7 GSXR1000,not really out of choice but maybe should buy one for work purposes...(parts etc)
but i think the 3 way power switch will be really useful for riding in the japanese twisties,be able to tone the power down a bit

900 is amazing, as all are, beautiful!!
Good to see/hear from you
Dylan

Ok. Heres my bike. I posted these pics on another forum, which I will not name (specifically R1)LoL. first reply was from some idiot who wanted to talk crap.

http://i218.photobucket.com/albums/cc124/gray07r1/Picture069.jpg
http://i218.photobucket.com/albums/cc124/gray07r1/mods1.jpg
http://i218.photobucket.com/albums/cc124/gray07r1/mods2.jpg
http://i218.photobucket.com/albums/cc124/gray07r1/mods3.jpg
http://i218.photobucket.com/albums/cc124/gray07r1/mods4.jpg
http://i218.photobucket.com/albums/cc124/gray07r1/mods5.jpg

Welcome to the BEST Yamaha forum on the net. :fact

Nice looking ride!

Looks good Shane, but why's your kickstand down when the bikes up on stands?

Well here's mine with this winter's and spring's work done. Suspension, calipers and wheels (2CT's already on) hopefully coming soon.

The list:

Boz Brothers MOIRA B2 Series Full Exhaust System
PC III
Custom LED Integrated Blaster X Tail Lights: Plug in Play
Greggs Clear Front Turn Signals
Carbon Fiber Clutch Guard
Puig DB Windscreen: Dark Smoke
Moto GP Replica Sticker Kit(s):
KR Frame Sliders
BMC Race Filter
Carbon Fiber Hugger: Red Racing
Magiacl Racing Carbon Fiber Fender
Magical Racing Carbon Fiber Lower Tank Side Covers
Magical Racing Carbon Fiber Upper Tank Part
Brembo Radial jointed brake master cylinder 19RCS
Gilles Chain Adjusters
Gilles GP Lifts
Driven Gel Grips
MotoWizard Preload Adjusters
Gilles VCR Rear Sets
DID ZVM2 530 Chain: Gold
CRG GP Clutch Pertch and Folding Lever
Goodridge Front Brake Lines
Goodrige Rear Brake Lins
AFAM Rear Sprocket: 45
AFAM Front Sprocket: 17
Seat Cowl: Yamaha OEM
Puig DB Windscreen: Clear (Trackdays)
M Carbon Carbon FiberInsert Panels
Custom Undertail: UH Motorsports Coming
Lightech Tank Cap; Rapid Lock
Yoyodine Clear Reservior Tubing


http://i181.photobucket.com/albums/x249/kennyw1106/P4210030.jpg

http://i181.photobucket.com/albums/x249/kennyw1106/P4210025.jpg

http://i181.photobucket.com/albums/x249/kennyw1106/P4210035.jpg

My Favorite addition
http://i181.photobucket.com/albums/x249/kennyw1106/P4210033.jpg

I still can't decide if I wanna drop the money on that airbox cover. Can't decide if I like the black on blue there. Bike looks good tho :thumbup

OK smartass. thats real funny LOL. truthfully I didn't pay that much attention when taking the pics. However, I have already take some of the stickers off.

Looks good Shane, but why's your kickstand down when the bikes up on stands?

Wow, i really like that 2000... lotta work on her. did you powder coat the frame and swingarm? '04 front end and rear brake bolt right on?? so nice.... :thumbup

my 2000 & 2006
http://i173.photobucket.com/albums/w61/slugbait71/Yamaha001-1.jpg

Looks good Shane, but why's your kickstand down when the bikes up on stands?

One time I took the bike off the rear stand in a hurry and forgot to put the side stand down (dumbass, I know). Couldn't stop it going down but luckily just laid it down on the carpet that it was on so no damage. Always have side stand down now :)

I've go mild OCD tho, and check to make sure it's down like 3 times before actually pulling the bike off the stand. :lol Even then I let it down sooooooooo slow to make sure the kick stand doesn't slide or move. :lol

Yep powdercoated frame 04 front 02 rear caliper & hanger
http://i173.photobucket.com/albums/w61/slugbait71/Yamaha003-4.jpg

Looks bad ass! :thumbup

lovin the powdercoated frame!!! :thumbup always wanted to do mine in gold... :rolleyes

Yep powdercoated frame 04 front 02 rear caliper & hanger
http://i173.photobucket.com/albums/w61/slugbait71/Yamaha003-4.jpg

Nice looking bike. But, unless you're hanging the 02 rear upside down, it's still in a '98-01 position. 02/03 the caliper was up top.

yeah its upside down I have another bike with a 02-03 swingarm that will have it mounted in the correct position

Ok I ordered some mods, and I spent tonight putting some of them on.

Put the Sato rearsets on. I haven't got on and fitted them yet, and I haven't attached the brake light switch, but they are on till I can get some time to adjust them.

Put on my Motovation swing arm spools, and Motovation bar ends as well.

Motovation frame sliders will go on sometime this weekend. :thumbup

So far total mods are;
Sato rearsets, Motovation Frame Sliders (not installed yet), Motovation bar ends, Motovation swingarm spools,-1 Driven 520 Sprocket kit with Gold EK MVXZ chain, Gregg's mirror block offs/Gregg's flushmount turnsignals/Graves Ti Cat-Elim Slip on/Graves fender elim/Dynojet PCIII/Pazzo Shorty Levers/Driven Grips/Clear Alternatives integrated tail light/Puig windscreen/GYTR Rear Cowl/DIY CCFL Blue angel eyes.

Ok bike is super dirty, and it's in my garage at 4am so the pics suck, but here they are

Oh ya front sprocket cover isn't on in the photos either but it's probably going back on cuz I can't figure out what to do with the wires and hoses. Any info on that?

http://farm4.static.flickr.com/3278/2678862679_187627ba09_b.jpg

http://farm4.static.flickr.com/3155/2678863035_7fc752890d_b.jpg

http://farm4.static.flickr.com/3131/2679681838_c937a42a06_b.jpg

http://farm4.static.flickr.com/3071/2679681516_dec1807ed8_b.jpg

After I get the frame sliders on, and get everything thread locked I'll taker her outside clean her up and get some good pics.

Edit gotta put the rear cowl back on and get rid of those damn rear pegs for the pics too.

Looks good. But, you're supposed to thread lock them as you install. :poke

Looks good. But, you're supposed to thread lock them as you install. :poke

Nope cuz then if I mess up it's thread locked together. Gonna take it apart bolt by bolt after I get everything exactly where I want it, and then thread lock it. :thumbup

Rearsets look good man:thumbup

Thanks :thumbup gotta get the bike cleaned and use my tripod so I can get nice looking pics to post up.

Nope cuz then if I mess up it's thread locked together. Gonna take it apart bolt by bolt after I get everything exactly where I want it, and then thread lock it. :thumbup

The thread lock doesn't dry right away, so if you need to loosen it up, it doesn't harden immediately making you reapply it.

My comment was more towards the non-adjustable mounting parts such as frame slider bolts, caliper mounting bolts, etc. The adjustable aspect of the rearsets you can do without while you're finding the best position. Just be sure to check the bolts before you go out every time.

I gotcha, Haven't done the frame sliders yet tho, and I'll put those on with threadlock. And I actually threadlocked the mounting bolts for the rearsets but none of the factory bolts or adjustable bolts because I haven't had time to adjust them at all, and I know I don't like the current set up.

It looks sweet :thumbup But I gotta comment (and dont take it as criticism) I almost wish the rearsets were matte instead of gloss. Just looking at them against the frame and swingarm they standout as quite a bit more glossy than everything else. But no doubt they still look good bro ;)

Looks great!!!
If your gonna keep standard shift I'd put the sprocket cover back on. If you switch to GP shift you can still use the cover but you'll have to notch it for linkage clearance. As for thread lock, I'd still use it if your not going to be changing the adjustments immediately. I lost a bolt off of mine that was factory installed and ended up losing function of my rear brakes all together. Definitely gave me some pucker when I went to slow down in the pits at a TD and had no brakes. Thread locker is cheap and it's not glue, so its no biggie if you lock em then have to remove the bolt the next day to make an adjustment.


My.02

Ya the gloss definitely stands out there but I also used the flash instead of a tripod. If you check out Bogies pics from the rearset thread you can get a better idea of what it looks like.

I've been working wierd hours so I haven't had any time to ride that's why I haven't been in a rush to thread lock everything. If I was going to ride it I'd lock everything down first.

Syn did you brace your engine when you installed the motivation frame sliders?

No bracing necessary when installing the sliders. Just do them one at a time and you'll be fine.

Everything installed :thumbup

http://farm4.static.flickr.com/3101/2686254623_d06fdbd502_b.jpg

http://farm4.static.flickr.com/3130/2686236593_e57029de95_b.jpg

http://farm4.static.flickr.com/3140/2686235037_2d513e28d2_b.jpg

Some minor updates :sneaky

recent pics :sneaky

Some minor updates :sneaky

Doesn't that discoloration of the tail pipe indicate your fuel mixture is messed up? or is that the way it was designed?

Doesn't that discoloration of the tail pipe indicate your fuel mixture is messed up? or is that the way it was designed?

titanium blues with heat cycles naturally, plus the link pipe was formed by hand with heat, that's adds bluing as well, and the Ti motoGP canister is blued to my specs when it was built in Japan :sneaky


new skins & sound bite from exhaust- YouTube - Ron's K-Factory MotoGP Canister (http://www.youtube.com/watch?v=7TkymJczpfo) :thumbup

I'd really like to post my bike up here but I don't know how...I'm not the greatest with mputers but I would like to support the site. A little help please?

you bike looks really nice!!!

I'd really like to post my bike up here but I don't know how...I'm not the greatest with mputers but I would like to support the site. A little help please?

Here you go :beer

Yamaha Forum : Your Yamaha Motor Products Community & Resource - FAQ (http://www.yamaha-forum.net/forum/faq.php?s=&do=search&q=attachments&match=all&titlesonly=0)

How do I attach a file to a post?
To attach a file to your post, you need to be using the main 'New Post' or 'New Thread' page and not 'Quick Reply'. To use the main 'New Post' page, click the 'Post Reply' button in the relevant thread.
On this page, below the message box, you will find a button labelled 'Manage Attachments'. Clicking this button will open a new window for uploading attachments. You can upload an attachment either from your computer or from another URL by using the appropriate box on this page. Alternatively you can click the Attachment Icon to open this page.
To upload a file from your computer, click the 'Browse' button and locate the file. To upload a file from another URL, enter the full URL for the file in the second box on this page. Once you have completed one of the boxes, click 'Upload'.
Once the upload is completed the file name will appear below the input boxes in this window. You can then close the window to return to the new post screen.
What files types can I use? How large can attachments be?
In the attachment window you will find a list of the allowed file types and their maximum sizes. Files that are larger than these sizes will be rejected. There may also be an overall quota limit to the number of attachments you can post to the board.
How do I add an image to a post?
If you have uploaded an image as an attachment, you can click the arrow next to the 'Attachment Icon' and select it from the list. This will be inserted into your post and can be located where you want it displayed.
To include an image that is not uploaded as an attachment and is located on another website, you can do so by copying the full URL to the image, (not the page on which the image is located), and either pressing the 'Insert Image' icon or by typing before the URL and after it, ensuring that you do not have any spaces before or after the URL of the image. You can insert pictures from your albums (?) (http://www.yamaha-forum.net/forum/faq.php?faq=vb3_user_profile#faq_vb3_albums) in this way too.

titanium blues with heat cycles naturally, plus the link pipe was formed by hand with heat, that's adds bluing as well, and the Ti motoGP canister is blued to my specs when it was built in Japan :sneaky


new skins & sound bite from exhaust- YouTube - Ron's K-Factory MotoGP Canister (http://www.youtube.com/watch?v=7TkymJczpfo) :thumbup

that is one sexy bike. it looks like rossi's bike. damm that exhaust looks awesome. all you need is a little more of carbon fiber... lol just a little more:pop

that is one sexy bike. it looks like rossi's bike. damm that exhaust looks awesome. all you need is a little more of carbon fiber... lol just a little more:pop


thanks, ya its not bad for someone who's nearly 60yrs old :scooter


think it's reached the max for CF, it really could use a brake & suspension upgrade's, but with my pay cuts that's probably not going to happen for awhile :no

thanks, ya its not bad for someone who's nearly 60yrs old :scooter


think it's reached the max for CF, it really could use a brake & suspension upgrade's, but with my pay cuts that's probably not going to happen for awhile :no

lol :idea you know what it would really look cool. the exhasust carbon fiber that rossi has on his bike right on top of the exhaust pipe.

lol :idea you know what it would really look cool. the exhasust carbon fiber that rossi has on his bike right on top of the exhaust pipe.

:yahoo

thanks, ya its not bad for someone who's nearly 60yrs old :scooter


think it's reached the max for CF, it really could use a brake & suspension upgrade's, but with my pay cuts that's probably not going to happen for awhile :no

Alth rotors for your R1 for about $173/pr. Add on a set of pads and you'll be golden. :poke

Alth rotors for your R1 for about $173/pr. Add on a set of pads and you'll be golden. :poke

I looked at them but didn't see them listed for 02/03 R1, like the plain don't care for the petal cut, and I really need a radial master too :violin

lol :idea you know what it would really look cool. the exhasust carbon fiber that rossi has on his bike right on top of the exhaust pipe.


there isn't enough clearance for it between the rearset's and the racing upsweep link pipe, the M1 link pipe isn't angled upward as much as mine :no

I still can't believe you store that thing outdoors rorlow.

I still can't believe you store that thing outdoors rorlow.

with the bikebrace & onguard chain its pretty secure, and being covered in my carport its out of the sun & weather, and in the winter its in my living room :yes

I looked at them but didn't see them listed for 02/03 R1, like the plain don't care for the petal cut, and I really need a radial master too :violin



Thought I saw 02/03? Will have to look again. I bought a set of circular cut (I'm with ya, don't like the petal cut) Black center rotors for the '07. Chad either warped them with his riding style, or they might have been slightly bent when he went down. :dunno

Pricing is so good, I might order a spare set to have on hand. Need to get some SBS double cintered pads (what Alth recommends on these rotors IIRC).

with the bikebrace & onguard chain its pretty secure, and being covered in my carport its out of the sun & weather, and in the winter its in my living room :yes

yea for sure. Makes a hell of a livingroom piece.

Thought I saw 02/03? Will have to look again. I bought a set of circular cut (I'm with ya, don't like the petal cut) Black center rotors for the '07. Chad either warped them with his riding style, or they might have been slightly bent when he went down. :dunno

Pricing is so good, I might order a spare set to have on hand. Need to get some SBS double cintered pads (what Alth recommends on these rotors IIRC).

I just looked them up on their Italian website and they do make them for the 02/03, maybe I tell the GF that a new Radial MC & rotors would be nice for Xmas :whisper

Give it a go Ron. :)


Think it's been quite a while since I posted a pic of my stable


http://www.yamaha-forum.net/forum/picture.php?albumid=19&pictureid=507

I am dizzy just looking at all these bikes, Keep them coming

Couple pics of our bikes. Picked up my R1 the first week of DEC05, bought a few parts for it over the years. Wife got the 250r FEB08, shes calls him "Marvin".

Here are some pix of my R1 & my old GSXR

Give it a go Ron. :)


Think it's been quite a while since I posted a pic of my stable


http://www.yamaha-forum.net/forum/picture.php?albumid=19&pictureid=507

I didn't know you had an 07 R1?

I didn't know you had an 07 R1?

It's GAWarrior's from over on R1-F. His family wound up raffling it off because of some problems trying to sell it to various people and either falling through, or being scammed. One of the two tickets I bought was the winning ticket. So, I drove down to Atlanta the first weekend in August to pick it up. Got a chance to ride MX in the red clay down there. About 3,000 mile round trip once you add in a couple of stops.

Kind of bitter sweet. It's cool to have won a WERA race prepped R1. But, between that or having Chad still be alive and riding it, I'd rather see Chad here.

ok so someone said I needed more CF on the bike, here's the latest addition (free sample) from Japan :yahoo

also swapped the heel plates on my rearsets and the lifters on my chain adjusters for Ti ano for more of an endurance look, and break up the black & add some contrast to the swingarm area :smoke

here is my bike

nice bike mate. if you grind off that weld bead and smooth it out and recoat it, that thing will be a nice show piece

Smoked Puig Windscreen
Pazzo Shorty Levers
Driven Grips
Rizoma Bar Ends
GPR Damper
Scorpion Exhaust
Factory Pro SuperFlare Velocity
Stacks Factory Pro Ignition Advancer
Graves Slide Stops W/ FPB
Dynojet PC3 USB (with custom map)
BMC Race Filter
Lockhart Phillips Integrated Turn Signals
Rear Fender Eliminator With New Blinkers
Targa Seat Cowleuro wedding dresses (http://www.wellbridal.com/euro_wedding_dress.html)
plus size wedding dresses (http://www.wellbridal.com/plus_size.html)

Harris Exhaust Hanger
Lockhart Phillips Frame Sliders
Black Sato Rearsets
520 Conversion -1/+0
Drive Systems Sprocket
EK 520 MVX Chain
Custom Tank Pad
MotoMummy Fire Reservoir Sock

The list goes on. Cant remember the rest :)

My baby...

http://i818.photobucket.com/albums/zz104/carbonar1/IMG_0797.jpg

http://i818.photobucket.com/albums/zz104/carbonar1/IMG_0803.jpg

http://i818.photobucket.com/albums/zz104/carbonar1/IMG_0831.jpg

http://i818.photobucket.com/albums/zz104/carbonar1/PB036.jpg

Very nice. :)

Cheers :thumbup

i dont know why i can't post images, it says pic too big.

i dont know why i can't post images, it says pic too big.

If you use XP this will change the size
Microsoft PowerToys for Windows XP (http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx)

Out of curiosity, do yo want only current bikes? Or, can we post up our past bikes and the mods as well? :dunno

hey..I am a newbie ...Just to have a good look !!!!





Coach Bags (http://coachbagsreviews.com)|coach factory outlet (http://www.coachfactoryoutletstorereviews.com)|coach outlet (http://www.buyfashiononline.net)


you velly sneaky spam man :gtfout


about the CF . . . couldn't help myself . . . got more, and swapped the black cap for red along with blue ti bolts and removed front number plates:lmao

I love the windshield, and the rear hugger!

1994 YZF750

http://i1080.photobucket.com/albums/j332/manivbio/DSC10071119.jpg

http://i1080.photobucket.com/albums/j332/manivbio/DSC10071118.jpg

http://i1080.photobucket.com/albums/j332/manivbio/DSC1007118.jpg

updated pics :postwhore

Very nice Ron

Very nice Ron

finally broke down and picked up a set of full floating PFM ductile iron rotors & new Ferodo pads . . . next up Brembo radial master :fact

I am just looking for other bikes to showcase on the front page and let the members know that this site is for them.

list updated as of today :hammer

and yes I indulged in more carbon fiber for the relic, still waiting on the CF kickstand and blue alcantara upholstered seat & cowl pad :yahoo