Yamaha Powersport Forums banner

Yzf-750 Tail Conversion

4K views 1 reply 2 participants last post by  uggiebear 
#1 ·
I have read through many of the posts on here and know that a handful of people have converted their 750 tail to an r1, r6, or even r7 tail. I want to keep the functionality of the passenger seat when I do this, so from what I can tell that rules out the r7 path as the only r7 tails I can find are race plastics.

For those of you that have done this, or have seen anyone attempt it, I have some questions: What model fit the best, r1 or r6? What years? Will it fit over the existing subframe or do you need to convert that as well? I'm leaning toward trying for an r1 tail, does anyone know if the 98-99 model is much different than the 00-01? And finally, what must be done to keep the seats (presumably the new ones) functional? (this may go back to the subframe question...)

Any input would be appreciated, and any pictures would be great! Thanks guys
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top