Hello: could'nt send email not enough posts.
The fairing mods are not hard if you can do a bit of welding or know someone that can,
1st, rad was to wide for the r7 fairing to sit on the bike properly needed to cut bottom of rad and re-weld/
2nd, fairing clock mount and stay had to be altered,cut and re-welded,if i done this mod again, i would get race dash ,techtronic,or vector dash is good i have that on my streetfighter project a lot easier.plus you only need LED lights as well, for instrument panel thats what i would do in hindsight.
3rd, all new fairing brackets made,
4th,you will have an issue with the clip-ons hitting the fairing, so you will need after market clip-ons or do what i done and swap the right clip-on to the left handle bar and turn it upside down vivas versas with the left to right,and lower them under the top yoke by 60mm.
5th, i used a race fairing, didnt want to spoil the look, and went for bicycle lights underneath,i will enclose photo,needed new bulbs for the right angle of lighting, have the info somewhere.
hope all this helps, and if you need anymore info just email me,
the r7 fairing was bought for £280, but i cant remember where from i have the paperwork indoors,i will have a look at the weekend,
happy building,it will be worth it.
regards.
wayne