brake and clutch levers - Yamaha Forum : Your Yamaha Motor Products Community & Resource
FZ's, FZR's, & YZF 750 FZ-600, FZ-700, FZ-750, & YZF-750

 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 01-28-2013, 03:34 AM Thread Starter
Junior Member
 
Join Date: Jan 2013
Posts: 3
 
brake and clutch levers

hi, cant find any pazzo type levers for the 94/95 fzr 600r but have found a set for yzf750 and 1000 all years, fzr 1000 91+. would they be the same fitment as my 600r?
taffy is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 01-29-2013, 11:27 AM
Senior Member
 
Join Date: May 2011
Posts: 178
 
The brake lever is most likely the same but the clutch is hydraulic on the YZF750 and Wire on the 600. There are quite a few different brake pumps for yamaha sportbikes and they have a few subtle differences so I would compare the numbers on the pumps to see if theres something that differs.
killawife is offline  
post #3 of 8 (permalink) Old 01-29-2013, 12:35 PM
Member
 
Join Date: Nov 2011
Location: hull, england
Posts: 40
 
hia taffy, used to have a 95 fzr600 and i had a thundercat clutch lever and a 97 xjr1200 sp brake lever. got some cheap chinese ones and they were great. hope this helps
vince is offline  
post #4 of 8 (permalink) Old 01-29-2013, 01:33 PM Thread Starter
Junior Member
 
Join Date: Jan 2013
Posts: 3
 
thanks for the input guys, killa never thought about that. thanks vince, thats exactly what im looking for on a certain auction site
taffy is offline  
post #5 of 8 (permalink) Old 01-29-2013, 02:01 PM Thread Starter
Junior Member
 
Join Date: Jan 2013
Posts: 3
 
heres a spanner in the works, fzr600r and thundercat brake and clutch levers look identical to me. And the cat and xjr12 brake levers look the same.
taffy is offline  
post #6 of 8 (permalink) Old 01-30-2013, 09:11 AM
Senior Member
 
Join Date: Dec 2011
Location: cheshunt , herts
Posts: 250
 
600r and thundercat r the same they share a lot of parts as i have a 600r my self
mad73 is offline  
post #7 of 8 (permalink) Old 01-30-2013, 12:46 PM
Member
 
Join Date: Nov 2011
Location: hull, england
Posts: 40
 
Unhappy

they probably are! isnt that what you wanted? when i was after shorty levers nobody listed the fzr as it was too old, i checked against all the bikes friends n family had, (even a guy at squires who let me remove his front brake lever to check against mine!) and the thundercat clutch and xjr1200 brake are what i came up with, im sure there will be others but at the time these were relatively modern bikes, so available as aftermarket parts. if iv miss understood what you were after sorry. but you should still be able to find levers listed for these bikes.
vince is offline  
post #8 of 8 (permalink) Old 01-31-2013, 09:10 AM
Senior Member
 
Join Date: Dec 2011
Location: cheshunt , herts
Posts: 250
 
Won't bother up grading the fzr it's all done now Will make a start on my yzf soon as weather warms up but that will get short leavers
mad73 is offline  
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Forum : Your Yamaha Motor Products Community & Resource forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
BREMBO RCS Brake & Clutch Master Cylinder moto Motowheels 0 07-13-2012 09:29 AM
YZF clutch and brake cylinders tstugelmayer FZ's, FZR's, & YZF 750 8 06-26-2011 09:44 PM
Possible to switch clutch and rear brake? riley42 General Bike Discussion 11 03-30-2009 01:35 PM
Folding Billet brake / Clutch Levers moto Motowheels 3 12-28-2007 10:44 AM
How To Install Clutch/Brake Levers for 2005 R6 !Ron Mechanical / How To 0 10-31-2007 09:58 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome